2010 P.3
Part No.: 9109-3100
0 Avis
Les vélos de la série P sont les piliers du hardtail progressif et constituent la…
Couleur:
Red
Taille:
Long
Rupture de stock en ligne
Dieser Artikel ist nicht verfügbar
Rupture de stock en ligne
Dieser Artikel ist nicht verfügbar
Indisponible
Cet article est indisponible via Trouver en magasin
Caractéristiques du produit
Les vélos de la série P sont les piliers du hardtail progressif et constituent la crème des vélos pour le dirt jump, le street et le park. Grâce à leur géométrie étudiée, les composantes recherchées et leur robustesse proverbiale, ces vélos peuvent accompagner les gars comme Darren Berrecloth dans leurs manœuvres aériennes à haut risque.
Motostar 28-tooth chainring features the patented Wave design for vise-grip-like engagement with the chain
Avid Elixir 4 hydraulic disc brakes with 140mm G3 Clean Sweep rear rotor and reach adjust give you no excuses to lose control
Fuse SL 2-piece crankset with heat-treated Sanko Cr-Mo tubular arms and hollow 19mm Cr-Mo spindle gives you back everything you put in
Specialized Fuse SL saddle uses a rail brace for increased lateral strength, with front and rear PVC bumpers to stand up to daily abuse
Forged alloy singlespeed hub with a 13-tooth Cr-Mo cog and machined disc mount is solid and true, with an M10 nutted axle to anchor the rear wheel with an iron fist
Specialized Lo-Mag platform pedals with sealed cartridge bearings, heat-treated Cr-Mo spindles and removable pins are light and virtually unbreakable, despite your best attempts
Double-butted A1 Premium Aluminum frame with ORE top/down tubes and ultra-strong forged head tube, bottom bracket and horizontal dropouts built to take abuse, without the extra weight to bring you down
80mm-travel Marzocchi DJ1 fork uses a stiff-but-plush air-assisted coil spring with adjustable rebound, 32mm alloy stanchions and magnesium lower with 20mm thru axle for all-out strength and more versatility for your style of riding
Spécifications techniques
FRAMESET
FRAME
P. Series A1 Premium Aluminum, double-butted ORE DT, forged HT/ISCG BB/chainstay yoke/horizontal dropouts, integrated chain tensioner and axle carrier, multispeed hardware, disc only, 6mm offset rear triangle
HEADSET
FSA PIG FS, 1-1/8"" Cr-Mo cup threadless w/ hollow cap bolt
SEAT BINDER
Forged Alloy single bolt clamp, 34.9mm
SUSPENSION
FORK
Marzocchi DJ1, 80mm, Alloy steerer and 32mm stanchions, 1pc. magnesium lower w/ 20mm through axle, cold forged alloy crown, open bath damping w/ rebound adj., air assist ""stiff"" coil spring w/ preload adj., disc only
WHEELS
RIMS
P.3 Disc, double wall disc w/ eyelets, 36h
FRONT HUB
Forged Alloy, cartridge bearing, 20mm thru-axle, machined Hi-Lo flanges and disc mount, 36h
REAR HUB
Forged alloy single speed cassette, machined flanges and disc mount, cartridge bearings, 36h, nutted 3/8"" axle, 1/8"" x 13t cog
SPOKES
2mm (14g) stainless
FRONT TIRE
Specialized Rhythm Lite Control, 26x2.3"", 60TPI, aramid bead
REAR TIRE
Specialized Rhythm Lite Control, 26x2.3"", 60TPI, aramid bead
INNER TUBES
Schraeder valve
DRIVETRAIN
CASSETTE
Single speed, Cr-Mo, 1/8"" x 13t
CHAIN
KMC KOOL K710SL, 1/2"" x 1/8""
CRANKSET
Fuse SL 2pc., heat treated Sanko Cr-Mo tubular arms, hollow 19mm Cr-Mo spindle
CHAINRINGS
CNC cut 6061, 28t, Motostar design w/ Pattented Wave engagement
BOTTOM BRACKET
Fuse SL Euro, Alloy threaded cup, 4x cartridge bearing, Machined alloy cone spacers
COCKPIT
SEATPOST
Alloy two bolt, no offset, micro adjust, 30.9mm
STEM
SBC Aggro Stem, 3D forged/CNC, 4-bolt, 35mm length
HANDLEBARS
Alloy riser bar, 60mm riser, 685mm wide, 8 degree back sweep, 6 degree up
GRIPS
Fuse BMX clamp-on, open end, 136mm
SADDLE
Specialized Fuse Lo Pro SL, super light foam, hollow 8mm Cr-Mo rails
BRAKES
FRONT BRAKE
Avid Elixir 4, full hydraulic, alloy backed organic pads, G3 Clean Sweep rotor, 160mm
REAR BRAKE
Avid Elixir 4, full hydraulic, alloy backed organic pads, G3 Clean Sweep rotor, 140mm
BRAKE LEVERS
Avid Elixir 4 Hydraulic
ACCESSORIES
PEDALS
Specialized Lo-Mag platform, magnesium body, heat treated 9/16"" Cr-Mo spindle, sealed cartridge bearings
* Les poids sont basés sur les cadres peints en production comme illustré. Les poids réels varieront en fonction de la couleur, de la taille du cadre et de la variation des composants. Les spécifications sont sujet à changement sans préavis.
Géométries
| L | |
|---|---|
| Ground-Top | 875mm |
| Bottom Bracket Height - Low Setting | 301mm |
| Top Tube Length (Horizontal) | 595mm |
| Head Tube Height | 108mm |
| Head Tube Angle - Low Setting | 68.5° |
| Seat Tube Angle (Actual) - Low Setting | 70° |
| Seat Tube Angle (Effective) - Low Setting | 72° |
| Top Tube Length (Actual) | 579mm |
| Seat Tube Length - Center to Top | 370mm |
| Wheel Base | 1063mm |
| Standover Height | 677mm |
| Stack | 574mm |
| Reach | 409mm |
| Chainstay Length | 394mm |
| Crank Length | 175mm |
| Handlebar Width | 680mm |
| Stem Length | 40mm |
| Seatpost Length | 300mm |
Téléchargements manuels
Pour les avertissements de sécurité, veuillez consulter la documentation dans la section "Téléchargements de manuels" de cette page.
Avis des cyclistes
0 Avis