Free shipping on orders over $150.
CHAIN | SRAM PC-971, 9-speed w/Power Link |
BOTTOM BRACKET | SRAM GXP, outboard bearing |
CRANKSET | BlackBox SRAM Descendant, 7050 alloy arms, 9-speed double, with Gamut Shift Guide |
FRONT DERAILLEUR | Shimano FD-M660 SLX, E-type for DMD, top swing, bottom pull |
SHIFT LEVERS | SRAM X.9, 9-speed, aluminum trigger |
CASSETTE | Shimano HG61, 9-speed, 11-34t |
REAR DERAILLEUR | SRAM X.0, 9-speed, mid cage |
FORK | Fox 36 Van RC2, tapered alloy steerer, low/high speed compression and rebound adj., 20mm thru-axle, 180mm travel |
REAR SHOCK | Fox DHX RC4, coil over w/piggy back, rebound and High/Low speed compression and bottom-out control adj., 8.5x2.5"", S:450, M:500, L:550 |
SADDLE | Specialized Demo, 7mm hollow Cr-Mo rails |
SEATPOST | Thomson straight w/ 12 degree clamp, 367mm |
STEM | Specialized DH, forged, 35mm length, 4-bolt, 31.8mm |
HANDLEBARS | Specialized Demo low-rise bar, 7050 alloy, 750mm wide, 8 degree backsweep, 6 degree up, 31.8mm |
GRIPS | Specialized lock-on, S/M: Grappler, Other: Rocca |
FRONT HUB | Specialized Hi Lo disc, laser-etched logo, sealed cartridge bearing, 20mm thru-axle, 32h |
REAR HUB | Specialized Hi Lo 142 disc, laser-etched logo, double sealed cartridge bearing, 32h |
INNER TUBES | Presta valve 26x2.3 |
SPOKES | DT Swiss Competition 2.0/1.8/2.0mm stainless |
RIMS | Custom DT Swiss F550, 30mm wide, 32h |
FRONT TIRE | Specialized Butcher SX, 60 TPI, aramid bead, soft dual compound, 26x2.3"" |
REAR TIRE | Specialized Butcher SX, 60 TPI, aramid bead, soft dual compound, 26x2.3"" |
FRONT BRAKE | Custom Avid Code X.0, hydraulic disc, tool-less reach and pad contact adj., Code caliper, metallic pads, stainless hardware, 203mm rotor |
BRAKE LEVERS | Custom Avid Code X.0 hydraulic, tool-less reach and pad contact adj., X.0 carbon lever blade |
REAR BRAKE | Custom Avid Code X.0, hydraulic disc, tool-less reach and pad contact adj., Code caliper, metallic pads, stainless hardware, 185mm rotor |
PEDALS | Specialized Lo-Pro Mag, removeable pins, 9/16"" |
HEADSET | 1-1/8"" cartridge alloy upper and 1.5"" lower, cartridge bearings |
SEAT BINDER | 34.9mm clamp ID, 7050 hard annodized alloy collar w/ QR, black |
FRAME | M5 manipulated ally, ORE TT/DT, tapered and forged HT, ISCG mount, 142mm dropouts, full cartridge bearing pivots and shock yoke, replaceable derailleur hanger, derailleur guard, 180mm travel |
S | M | L | |
---|---|---|---|
Crank Length | 170mm | 170mm | 170mm |
Stem Length | 40mm | 40mm | 40mm |
Seatpost Length | 300mm | 300mm | 300mm |
Handlebar Width | 750mm | 750mm | 750mm |
Reach | 412mm | 429mm | 453mm |
Stack | 594mm | 594mm | 594mm |
Chainstay Length | 419mm | 419mm | 419mm |
Top Tube Length (Actual) | 543mm | 556mm | 575mm |
Ground-Top | 950mm | 950mm | 950mm |
Top Tube Length (Horizontal) | 576mm | 594mm | 617mm |
Head Tube Angle - Low Setting | 65.5° | 65.5° | 65.5° |
Standover Height | 731mm | 734mm | 740mm |
Head Tube Height | 112mm | 112mm | 112mm |
Wheel Base | 1159mm | 1177mm | 1200mm |
Seat Tube Angle (Actual) - Low Setting | 70.5° | 70.5° | 70.5° |
Seat Tube Angle (Effective) - Low Setting | 74.5° | 74.5° | 74.5° |
Seat Tube Length - Center to Top | 394mm | 419mm | 458mm |
Bottom Bracket Height - Low Setting | 356mm | 356mm | 356mm |