Stumpjumper Pro

The Stumpjumper Pro is a top-tier, do-it-all, mind- terrain- and horizon-expansion tool. You get the same FACT 11m carbon frame as our S-Works Stumpjumper, with class-leading light weight and all-new suspension kinematics. You get a bike that devours quad-searing climbs with ease, and absolutely scorches the descents. You get the picture: This thing rips.

Top that off with SRAM's XO1 Eagle AXS 12-speed drivetrain and FOX Factory suspension and the “bang for the buck” factor is almost as rad as the bike itself.

Technical Specifications

FRAMESET

Frame

FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, flip chip Head Tube/Bottom Bracket adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 130mm of travel

Seat Binder

Alloy, 38.6mm

Suspension

Rear Shock

FOX FLOAT DPS Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment w/ Open Mode Adjustment, 190x45mm

Fork

FOX FLOAT 34 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, 140mm of travel

COCKPIT

Saddle

Bridge, 155/143mm, Hollow Ti-rails

SeatPost

Bike Yoke, Revive Max, 34.9 (S1:120mm, S2/S3:150mm, S4-S6: 185mm)

Stem

Deity, 35.0mm

Handlebars

Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm, 35.0mm

Grips

Deity, Knuckleduster, Black

BRAKES

Front Brake

SRAM G2 RSC, 4-piston caliper, hydraulic disc, 200mm

Rear Brake

SRAM G2 RSC, 4-piston caliper, hydraulic disc, 180mm

DRIVETRAIN

Rear Derailleur

SRAM X01 Eagle AXS

Shift Levers

SRAM Eagle AXS Rocker Paddle

Cassette

SRAM XG-1295 Eagle, 10-52t

Chain

SRAX X01 Eagle, 12-speed

Crankset

SRAM X1 Carbon, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm

Chainrings

Alloy, 30T

Bottom Bracket

SRAM DUB, BSA 73mm, Threaded

WHEELS

Rims

Roval Traverse Carbon 29, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready

Front Hub

DT Swiss 350, sealed cartridge bearings, 15x110mm spacing, 28h

Rear Hub

DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h

Spokes

DT Competition Race

Front Tire

Butcher, GRID casing, GRIPTON® T9 compound, 29x2.3"

Rear Tire

Purgatory, GRID casing, GRIPTON® T7 compound, 29x2.3"

Inner Tubes

Standard, Presta Valve

* Weights based on production painted frames as pictured. Actual weights will vary based on colorway, frame size, and component variation. Specifications are subject to change without notice.

Geometry

	S1	S2	S3	S4	S5	S6
Crank Length	165mm	170mm	170mm	170mm	170mm	175mm
Handlebar Width	780mm	780mm	780mm	780mm	780mm	780mm
Stem Length	35mm	35mm	50mm	50mm	50mm	50mm
Saddle Width	155mm	155mm	143mm	143mm	143mm	143mm
Seatpost Length	125mm	160mm	160mm	185mm	185mm	185mm
Stack (Low BB)	614mm	613mm	622mm	632mm	641mm	650mm
Stack (High BB)	610mm	609mm	618mm	627mm	636mm	646mm
Reach (Low BB)	410mm	430mm	450mm	475mm	500mm	530mm
Reach (High BB)	415mm	435mm	455mm	480mm	505mm	535mm
Headtube Length	95mm	100mm	110mm	120mm	130mm	140mm
Headtube Angle (Low BB)	65°	65°	65°	65°	65°	65°
Headtube Angle (High BB)	65.5°	65.5°	65.5°	65.5°	65.5°	65.5°
BB Height (Low BB)	328mm	333mm	333mm	333mm	333mm	333mm
BB Height (High BB)	335mm	340mm	340mm	340mm	340mm	340mm
BB Drop (Low BB)	47mm	42mm	42mm	42mm	42mm	42mm
BB Drop (High BB)	40mm	35mm	35mm	35mm	35mm	35mm
Trail (Low BB)	126mm	126mm	126mm	126mm	126mm	126mm
Trail (High BB)	123mm	123mm	123mm	123mm	123mm	123mm
Fork Length (full)	550mm	550mm	550mm	550mm	550mm	550mm
Fork Rake/Offset	44mm	44mm	44mm	44mm	44mm	44mm
Front Center	724mm	746mm	770mm	800mm	829mm	863mm
Chainstay Length	432mm	432mm	432mm	432mm	442mm	442mm
Wheelbase	1152mm	1175mm	1200mm	1228mm	1268mm	1302mm
Top-tube Length (horizontal)	563mm	583mm	605mm	632mm	660mm	692mm
Bike Standover Height	730mm	734mm	744mm	749mm	757mm	757mm
Seat Tube Length	385mm	385mm	405mm	425mm	445mm	465mm
Seat Tube Angle (Low BB)	76°	76°	76°	76°	76°	76°
Seat Tube Angle (High BB)	76.5°	76.5°	76.5°	76.5°	76.5°	76.5°
Max Seatpost Insertion	220mm	220mm	240mm	260mm	280mm	300mm
Min Seatpost Insertion	80mm	80mm	80mm	80mm	80mm	80mm