S-Works Stumpjumper FSR 29 Frame
$4,000.00
Part No.  

S-Works Stumpjumper FSR 29 Frame

$4,000.00
Part No.  106991
load-spinner
S-Works Stumpjumper FSR 29 Frame
Overview
Technical Specifications
Geometry
Reviews
When only the best will do, you need the ultimate trail bike. Or in other words, you need the S-Works Stumpjumper FSR Carbon 29. It reflects everything that we've learned over the years, and in our eyes, represents the pinnacle of perfection. Starting at the carbon layup, it features our highest-end FACT 11m for an ultra-lightweight, strong, and stiff construction. The carbon molding process also allowed us to revolutionize how you carry your trail essentials with the all-new SWAT Door found at the down tube. This compartment will fit a tube, a tool, and pump without rattling or compromising the structural integrity of the frame. And when you add-in an aggressive, trail-eating geometry that features ridiculously short chainstays, a roomy top tube, a low bottom bracket, and a slacked out front end, plus our proprietary Rx Trail Tune at the shock, you have a bike that, without a doubt, is ready for anything on the trail.
  • Command Post IRcc seatpost features 12 positions of up to 125mm of height adjustability for a more customizable position, ultimately resulting in more control and increased handling on both climbs and descents.
  • FACT 11m carbon fiber Trail Chassis with Stumpjumper FSR full carbon rear end blends stiffness with light weight to form the pinnacle of efficiency, while 135mm of travel, fully enclosed cable routing, and integrated SWAT Door create exceptional handling and zero-hassle storage.
  • Connected with our FSR 6-Pack Linkage, a custom FOX FLOAT Factory rear shock features AUTOSAG for easy setup and 135mm of plush, adjustable suspension, while our Rx Trail Tune provides a more supple, responsive, and efficient feel for climbing up and descending down the trail.

Technical Specifications

FRAMESET
SEAT BINDER Specialized, 7050 alloy, single bolt, 34.9mm
HEADSET Hella Flush, 1-1/8"" and 1-1/2"" threadless, Campy style upper w/ 1-1/2"" lower, cartridge bearings
FRAME FACT 11m carbon, Trail 29 Geometry, FACT IS carbon construction, SWAT Door integration, PF30 BB, fully enclosed internal cable routing, 142mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, front derailleur compatible w/ Taco Blade, 135mm travel
SUSPENSION
REAR SHOCK Custom FOX FLOAT Factory CTD, AUTOSAG, Rx Trail Tune, Boost Valve, Kashima coating, 197x47.6mm
COCKPIT
SEATPOST Command Post IRcc, cruiser control technology, micro-adjust height adjustable, alien head design, bottom mount cable routing, remote adjust SRL and grip lever, 30.9mm, S: 100mm travel, M/L/XL: 125mm

Geometry

Geometry Chart

Stumpjumper - Geometry

S M L XL
  S M L XL
Stem Length 45mm 60mm 60mm 60mm
Crank Length 170mm 175mm 175mm 175mm
Seatpost Length 390mm 430mm 430mm 430mm
Handlebar Width 750mm 750mm 750mm 750mm
Reach 389mm 417mm 435mm 461mm
Stack 617mm 617mm 645mm 663mm
Wheelbase 1115mm 1143mm 1172mm 1206mm
Bike Stand-Over Height 750mm 757mm 766mm 776mm
Head-Tube Length 95mm 95mm 125mm 145mm
Front-Center 680mm 708mm 738mm 771mm
Fork Rake/Offset 46mm 46mm 46mm 46mm
Head-Tube Angle 67.5° 67.5° 67.5° 67.5°
Trail 104mm 104mm 104mm 104mm
B-B Height 336mm 336mm 336mm 336mm
Chain-Stay Length 437mm 437mm 437mm 437mm
Fork Length (full) 551mm 551mm 551mm 551mm
Seat-Tube Angle 74° 74° 74° 74°
B-B Drop 36mm 36mm 36mm 36mm
Seat-Tube Length 396mm 430mm 468mm 523mm
Top-Tube Length (horizontal) 566mm 594mm 620mm 651mm

Reviews