S-Works Stumpjumper Carbon HT 29er
$6,100.00
Part No.  

S-Works Stumpjumper Carbon HT 29er

$6,100.00
Part No.  23062
load-spinner
S-Works Stumpjumper Carbon HT 29er
Overview
Technical Specifications
Geometry
Reviews
With enough years of experience under its belt to merit a podium finish every time, the Stumpjumper Hardtail is second only to its S-Works sibling when it comes to cross-country speed. Like the riders who hammer it, the Stumpjumper HT is lean, strong and exceedingly efficient, with an incredibly lightweight, high performance frame and spec combination. Now available in dedicated singlespeed and multi-speed models, with a full range of 26" and 29" versions.
  • Light and lean S-Works Stumpjumper HT 29er FACT 10m carbon frame is engineered with a stiff, tapered head tube and 29" race geometry for pure speed
  • Roval 29" Control EL XC wheelset with oversized 28mm end caps is ultra-lightweight, plenty strong, race-ready and prime for putting the hurt on every rider behind you
  • Specialized FACT OSBB carbon crankset with ceramic bearings and 26/39-tooth SRAM spider and rings boasts market-leading stiffness-to-weight for the ultimate power transfer
  • Custom Specialized/RockShock Reba S29 is the lightest, stiffest performance XC fork, featuring tapered carbon crown/steerer and Reba Team lower with titanium motion control damper, FloodGate adjust and lockout

Technical Specifications

FRAMESET
SEAT BINDER 36.9mm clamp, one bolt for carbon frame/post
HEADSET 1-1/8"" Threadless, 1 1/2"" lower, Campy style
FRAME FACT 10M carbon, 29"" geometry, 1.5 - 1/8"" tapered HT, alloy replaceable derailleur hanger, carbon drive-side dropout
WHEELS
FRONT HUB Roval Control EL XC, OS, 28mm axle caps
REAR HUB Roval Control EL XC, OS, stragiht pull
INNER TUBES Ultralight presta valve
RIMS Roval Control EL, 29"" XC disc wheel
FRONT TIRE S-Works Fast Trak LK, 29x2.0"", 120 TPI, tubeless ready aramid bead, dual compound
REAR TIRE S-Works Fast Trak LK, 29x2.0"", 120 TPI, tubeless ready aramid bead, dual compound
DRIVETRAIN
BOTTOM BRACKET S-Works, OS, integrated
CHAIN SRAM PC-1090, 10-speed
CRANKSET S-Works OS carbon crank, Custom XX spider/rings for SBC, 175mm
CASSETTE SRAM XX, 10-speed, 11-36t
SHIFT LEVERS SRAM XX carbon trigger
FRONT DERAILLEUR SRAM XX, 34.9mm clamp, bottom swing, top pull
CHAINRINGS 39A x 26A, 4-bolt
REAR DERAILLEUR SRAM XX, 10-speed, standard cage
COCKPIT
SADDLE Specialized Phenom SL, Ti rails, thin foam, 15.5/17: 130mm, others: 143mm
SEATPOST S-Works Carbon, 30.9mm, single-bolt head, 17.5: 350mm, others: 400mm
GRIPS Specialized waffle lock on grip (17.5) Specialized Thick lock on grip (others)
HANDLEBARS Specialized S-Works XC Carbon flat bar, 25.4mm, 600mm wide
STEM Synatce F99, 6 degree rise, 25.4mm clamp
BRAKES
BRAKE LEVERS Custom Avid XX Hydraulic, tool-less reach adjust, magnesium body, carbon lever
FRONT BRAKE Custom Avid XX R, alloy backed semi-metallic pads, magnesium caliper and lever body w/ carbon blade, ti hardware package, 160mm rotor
REAR BRAKE Custom Avid XX R, alloy backed semi-metallic pads, magnesium caliper and lever body w/ carbon blade, ti hardware package, 15.5/17: 140mm, others: 160mm rotor
ACCESSORIES
PEDALS None
SUSPENSION
FORK Custom SBC/RockShox Reba S29 Carbon, 90mm travel, One-piece tapered carbon crown/steeer tube, Rockshox Reba Team lower, titanium motion control damper, L/O w/floodgate adjust.

Geometry

Geometry Chart

Stumpjumper - Geometry

  17.5 19 21
Stem Length 90mm 105mm 105mm
Crank Length 175mm 175mm 175mm
Handlebar Width 600mm 600mm 600mm
Reach 408mm 433mm 456mm
Stack 621mm 631mm 641mm
Chainstay Length 436mm 436mm 436mm
Top Tube Length (Actual) 565mm 590mm 614mm
Ground-Top 925mm 935mm 945mm
Top Tube Length (Horizontal) 592mm 615mm 640mm
Head Tube Angle - Low Setting 71.5° 71.5° 71.5°
Standover Height 780mm 818mm 855mm
Wheel Base 1074mm 1106mm 1132mm
Head Tube Height 110mm 120mm 130mm
Seat Tube Angle (Actual) - Low Setting 72° 72° 72°
Seat Tube Length - Center to Top 445mm 483mm 533mm
Seat Tube Angle (Effective) - Low Setting 73.5° 73.5° 73.5°
Bottom Bracket Height - Low Setting 304mm 304mm 304mm

Reviews