S-Works Enduro 650b - Limited Edition Frame
$3,500.00
Part No.  

S-Works Enduro 650b - Limited Edition Frame

$3,500.00
Part No.  126369
load-spinner
S-Works Enduro 650b - Limited Edition Frame
Overview
Technical Specifications
Geometry
Reviews
If your aim is having fun, riding fast, and hitting every tight corner and jump in sight, you can't do any better than our all-new S-Works Enduro 650b Limited Edition frame. We gave it a whole new geometry, with a slacker front end, a longer top tube, even shorter chainstays, and a lower bottom bracket. All of this together makes the bike truly feel glued to the ground, and the platform is more responsive and capable then ever. We even added some brand new bits, like integrated storage with a SWAT™ Door at the down tube, and made "old" new again by making a triumphant return to a threaded bottom bracket. To keep the weight down, the frame is constructed from our top-tier FACT IS-X 11m carbon fiber. And to ensure top-level performance on the descents, this material choice is greeted by 170mm of plush travel at both the front and rear. And handling suspension duties out back is the revolutionary Öhlins single tube rear shock.
  • The frame's FACT IS-X 11m carbon fiber construction stands as the pinnacle of lightweight, efficient, and tough trail performance. It's been built off our 650b Geometry in order to provide an aggressive, well-rounded ride. And with internal Command Post IR routing, a return to a threaded bottom bracket, and an integrated SWAT™ Door at the down tube, you get a bike that's clean, dependable, and ready for anything that the trail has to offer.
  • The custom Öhlins STX single tube air shock at the rear features high- and low-speed compression, as well as low-speed rebound. You'll also find an extra-volume reservoir that allows for more oil, which results in more control and an ultra-plush ride quality.

Technical Specifications

SUSPENSION
REAR SHOCK Custom Öhlins STX, Single Tube design, Rx All-Mountain Tune, 3rd Chamber air spring technology, AUTOSAG, adjustable compression & rebound damping, 216x57mm
FRAMESET
SEAT BINDER Alloy, 36.6mm
FRAME FACT 11m, X-Wing layout, full carbon chassis and rear end, All-Mountain Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, ManFu link, oversized pivot bearings, 12x148mm dropouts, replaceable derailleur hanger, 170mm of travel

Geometry

Geometry Chart

Enduro - Geometry

S M L XL
  S M L XL
B-B Height (650x2.6) 350mm 350mm 350mm 350mm
B-B Height (650x2.3) 345mm 345mm 345mm 345mm
Reach 410mm 430mm 450mm 470mm
Stack 585mm 590mm 604mm 613mm
Wheelbase 1153mm 1175mm 1201mm 1225mm
Bike Stand-Over Height 761mm 771mm 782mm 796mm
Head-Tube Length 95mm 100mm 115mm 125mm
Front-Center 728mm 750mm 776mm 801mm
Fork Rake/Offset 51mm 51mm 51mm 51mm
Head-Tube Angle 65.5° 65.5° 65.5° 65.5°
Trail 106mm 106mm 106mm 106mm
Chain-Stay Length 425mm 425mm 425mm 425mm
Fork Length (full) 559mm 559mm 559mm 559mm
Seat-Tube Angle 76.5° 76° 76° 75°
B-B Drop 10.5mm 10.5mm 10.5mm 10.5mm
Seat-Tube Length 396mm 430mm 467mm 521mm
Top-Tube Length (horizontal) 551mm 576mm 604mm 632mm

Reviews