S-Works CruX Di2
$9,500.00
Part No.  

S-Works CruX Di2

$9,500.00
Part No.  65309
load-spinner
S-Works CruX Di2
Overview
Technical Specifications
Geometry
Reviews
The S-Works CruX Di2 is a 'cross beast, with race-optimized geometry, tapered headtube, internal cable routing, and an outstanding stiffness-to-weight ratio to power through the nastiest courses. Roval Control SL CX Disc wheels and Shimano Di2 electronic drivetrain with integrated hydraulic disc brakes complete the uber-tough, race-ready S-Works package.
  • Body Geometry Phenom Expert saddle w/ hollow Ti rails provides comfort for all-out efforts
  • Shimano Dura-Ace Di2, 11-speed rear derailleur for precise shifting no matter the conditions
  • Roval Control SL CX Disc wheels are both light weight and tough as nails
  • S-Works FACT carbon OSBB crankset is the perfect blend of light weight and stiffness
  • Shimano 785 hydraulic disc brakes for incredible modulation and stopping power
  • Specialized CG-R, FACT carbon seatpost is engineered for compliance and comfort
  • Specialized Terra Pro, 33c tires are 2Bliss Ready with tread for even the worst conditions

Technical Specifications

FRAMESET
SEAT BINDER Alloy, Ti bolt, 32.6mm
HEADSET 1-1/8"" upper, 1-3/8” lower, light alloy housing, stainless steel bearings, 8mm carbon cone spacer, w/ 25mm of carbon spacers
FORK Specialized FACT carbon
FRAME S-Works FACT 11r carbon, disc-specific, 1-3/8"" lower bearing, OSBB
WHEELS
REAR WHEEL Roval Control SL CX SCS, carbon
INNER TUBES Standard, presta valve
SPOKES
FRONT TIRE Specialized Terra Pro, 60TPI, 2Bliss Ready, folding bead, 700x33c
REAR TIRE Specialized Terra Pro, 60TPI, 2Bliss Ready, folding bead, 700x33c
FRONT WHEEL Roval Control SL CX SCS, carbon
DRIVETRAIN
CHAIN Shimano Dura-Ace, 11-speed
CRANKSET S-Works FACT carbon, OSBB, 46/36, w/ CeramicSpeed ceramic bearings
CASSETTE Shimano Dura-Ace, 11-speed, 11-28
SHIFT LEVERS Shimano 785 Di2, 11-speed
FRONT DERAILLEUR Shimano Dura-Ace Di2, 11-speed, braze-on
REAR DERAILLEUR Shimano Dura-Ace Di2, 11-speed
COCKPIT
SADDLE Body Geometry Phenom Expert, hollow Ti rails, 143mm
TAPE Specialized CX Pro, w/ sticky gel
SEATPOST Specialized CG-R, FACT carbon, single bolt, 27.2mm
HANDLEBARS Specialized Comp, shallow drop, alloy, 125mm drop, 70mm reach
STEM S-Works SL, alloy, 4-bolt
BRAKES
FRONT BRAKE Shimano 785, hydraulic disc, Ice Tech resin pads w/ fins
REAR BRAKE Shimano 785, hydraulic disc, Ice Tech resin pads w/ fins
ACCESSORIES
PEDALS Nylon flat test ride, loose-ball, w/ reflectors

Geometry

Geometry Chart

CruX - Geometry

  46 49 52 54 56 58 61
Stem Length 75mm 75mm 90mm 100mm 100mm 110mm 110mm
Crank Length 170mm 170mm 170mm 172.5mm 172.5mm 175mm 175mm
Handle-Bar Width 400mm 400mm 420mm 420mm 420mm 440mm 440mm
Reach 366mm 369mm 376mm 379mm 384mm 387mm 393mm
Wheelbase 1008mm 1007mm 1009mm 1016mm 1022mm 1025mm 1031mm
Stack 522mm 540mm 554mm 566mm 583mm 597mm 618mm
Seat-Tube Length, B-B Center to Top 470mm 490mm 510mm 530mm 550mm 570mm 600mm
Head-Tube Length 100mm 115mm 125mm 140mm 155mm 170mm 190mm
Top-Tube Length, Horizontal 510mm 516mm 537mm 548mm 560mm 570mm 587mm
Front-Center 593mm 593mm 595mm 601mm 606mm 609mm 615mm
Head-Tube Angle 69.5° 70.5° 71.5° 71.5° 72° 72.5° 73°
Fork Rake 51mm 51mm 51mm 49mm 49mm 49mm 49mm
Trail 75mm 69mm 62mm 64mm 61mm 58mm 55mm
Stand-Over Height 725mm 754mm 773mm 790mm 807mm 825mm 849mm
Chain-Stay Length 425mm 425mm 425mm 425mm 425mm 425mm 425mm
Seat-Tube Angle 75.5° 75.5° 74° 73.5° 73.25° 73° 72.5°
B-B Drop 71mm 71mm 71mm 69mm 69mm 67mm 67mm
Seat-Post Length 300mm 300mm 300mm 350mm 350mm 350mm 350mm

Reviews