Pitch Pro
Part No.  

Pitch Pro

Part No.  
Pitch Pro
Technical Specifications
BORN FROM THE SAME BRAINS that brought you the Enduro SL, the Pitch™ levels even the most demanding All Mountain terrain with a tough M4 alloy frame, 150mm of FSR suspension and a generous helping of top shelf specs—including RockShox, Fox and Avid components.
  • Fox RP2 two-position rear shock allows fully open or ProPedal settings and adjustable rebound to match varied terrain.
  • The 140mm long-travel RockShox Pike fork is exclusive to Specialized, with coil U-Turn, alloy steerer and adjustable rebound. Includes Maxle 360 for improved steering precision and stiffness.
  • Specialized thin lock-on grips and alloy bar end caps provide slip-proof hand traction in rough conditions.
  • Avid Juicy hydraulic brakes provide exceptional stopping power and reliability, with tool-less reach adjust, alloy-backed pads and size-specific CleanSweep rotors.
  • Lightweight yet durable DT Swiss double wall rims deliver improved wheel strength and steering precision in rocky conditions.

Technical Specifications

CHAIN KMC X9, 9-speed w/ reusable Missing Link
BOTTOM BRACKET Shimano M-532, integrated outboard cartridge bearing design
CRANKSET Shimano M532, 2pc., replaceable rings w/ alloy outer, S: 170mm, others: 175mm
SHIFT LEVERS SRAM X-5, trigger, 9-speed
CASSETTE Shimano HG-50, 9-speed, 11-34t
CHAINRINGS 22S x 32A x 44A, 4-bolt, 104/64mm
REAR DERAILLEUR SRAM X-9, 9-speed, mid cage
FORK Rockshox Pike 351 for Specialized, 140mm travel, coil U-Turn, Motion Control damper, disc only, alloy steerer, rebound adj., Maxle 360 included
REAR SHOCK Fox RP2, 2 position shock with pro-pedal or full-open, rebound adj., 7.875x2.25""
FRONT HUB Specialized Stout disc, sealed cartridge bearing, 20mm thru axle, high/low flange, 32h
REAR HUB Specialized disc, sealed cartridge bearing, high/low flange w/ OS contact side, 32h
INNER TUBES Specialized Ultralight 26x2.0"", presta
SPOKES 1.8mm (15g) stainless, black, alloy nipples
FRONT TIRE Specialized Eskar Control, 26x2.3"", 60 TPI, tubeless ready, aramid bead
RIMS DT Swiss 445D, disc, 24mm, double wall, pin joint, eyelets, 32h
REAR TIRE Specialized Eskar Control, 26x2.3"", 60 TPI, tubeless ready, aramid bead
SADDLE Specialized Enduro, 7mm Cr-Mo rails
SEATPOST Specialized 6061 alloy, black, 30.9x350, setback head, 2-bolt micro adjust
STEM Specialized, 8 deg. rise, four bolt 31.8mm clamp, 3D forged. S:60mm, M/L:75, XL:90mm
HANDLEBARS Specialized mid rise 31.8mm, 6061 alloy, 660mm wide, 8 degree up, 8 degree back sweep
GRIPS Specialized thin lock on grip, alloy bar ends
FRONT BRAKE Avid Juicy 4 RSL Hydraulic Disc Brake, alloy backed organic brake pads, tool-less reach adj., cleansweep 203mm rotor
BRAKE LEVERS Avid Juicy 4RSL Hydraulic
REAR BRAKE Avid Juicy 4 RSL Hydraulic Disc Brake, alloy backed organic brake pads, tool-less reach adj., cleansweep 185mm rotor
PEDALS Shimano 505 SPD, reflectors and cleats
HEADSET 1-1/8"" Threadless, loose ball bearings w/ seals, black steel cups
SEAT BINDER Alloy collar w/ QR, 34.9mm clamp ID
FRAME 2009 Pitch frame, M4 Manipulated Alloy tubing, double ORE downtube, DMD front derailleur mount, sealed cartridge bearing pivots, replaceable hanger, bolt on cable guides, 150mm travel


Geometry Chart

- Geometry

  S M L XL
Crank Length 170mm 175mm 175mm 175mm
Stem Length 60mm 75mm 75mm 90mm
Seatpost Length 350mm 350mm 400mm 400mm
Handlebar Width 660mm 660mm 660mm 660mm
Chainstay Length 421mm 421mm 421mm 421mm
Top Tube Length (Actual) 553mm 574mm 606mm 632mm
Top Tube Length (Horizontal) 565mm 586mm 620mm 645mm
Head Tube Angle - Low Setting 67° 67° 67° 67°
Standover Height 742mm 748mm 759mm 765mm
Head Tube Height 102mm 108mm 128mm 150mm
Seat Tube Angle (Actual) - Low Setting 71.9° 71.9° 71.9° 71.9°
Seat Tube Angle (Effective) - Low Setting 74° 74° 74° 74°
Seat Tube Length - Center to Top 421mm 444mm 483mm 533mm
Bottom Bracket Height - Low Setting 356mm 356mm 356mm 356mm