Pitch Comp
Part No.  

Pitch Comp

Part No.  
Pitch Comp
Technical Specifications
Out-of-the box with gobs of FSR suspension and quality specs, the Pitch allows you to get your fill of exhilaration without having to empty your wallet.
  • Pitch disc-specific double wall rims with eyelets provide the durability needed for all-mountain terrain
  • RockShox Ario rear shock with adjustable rebound and lockout for efficient climbs and plush, controlled descents
  • Truvativ GXP2 2.1 2-piece crankset with 24/36t rings for stiffness, durability, and efficient climbing/descending
  • RockShox Sektor 150mm-travel coli spring fork with lightweight alloy steerer, rebound adjust, and Maxle Lite thru-axle for consistency and durability
  • Custom Avid Elixir 3 R SL hydraulic disc brakes and Juicy 3 levers with G3 Clean Sweep rotors and alloy-backed organic pads promise maximum stopping power

Technical Specifications

CHAIN KMC X9, 9-speed, w/ reuseable Missing Link
BOTTOM BRACKET SRAM GXP, outboard bearing
CRANKSET Truvativ GXP2 2.1, 2-piece crank set, outboard bearing, S: 170mm, M/L: 175mm
FRONT DERAILLEUR Shimano FD-M660-E SLX, double specific E-type for DMD, top swing, bottom pull
SHIFT LEVERS SRAM X.5, 9-speed, trigger
CASSETTE Shimano HG30, 9-speed, 11-34t
CHAINRINGS 36A x 24S, 4-bolt, 104/64mm
REAR DERAILLEUR SRAM X.7, 9-speed, mid cage
FORK Custom RockShox Sektor TK, Turn Key damper, coil spring, alloy steerer, reb adj., 20mm Maxle Lite axle, 150mm travel
REAR SHOCK RockShox Ario, air spring, rebound adj. and LO, 7.875x2.2""
SADDLE Specialized BG Enduro, 7mm steel rails
SEATPOST 6061 alloy, 2-bolt micro adjust, setback head, 30.9mm, S/M:350mm, others:400mm
STEM Specialized XC, 3D forged alloy, 4-bolt, 31.8mm clamp, adjustable rise
HANDLEBARS Specialized All-Mountain low-rise, 6061 butted alloy, 720mm wide, 8 degree back sweep, 6 degree up, 31.8mm
GRIPS Specialized lock-on, S/M: Grappler, Other: Rocca
FRONT HUB Specialized Hi Lo disc, laser-etched logo, sealed cartridge bearing, 20mm thru-axle, 32h
REAR HUB Specialized Hi Lo disc, laser-etched logo, double sealed cartridge bearing, QR, 32h
INNER TUBES Schraeder valve 26x2.0
SPOKES 1.8mm (15g) stainless
RIMS Pitch disc-specific, pin joint, eyelets, 26mm, 32h
FRONT TIRE Specialized Eskar Sport, 60 TPI, wire bead, 26x2.3""
REAR TIRE Specialized Eskar Sport, 60 TPI, wire bead, 26x2.3""
FRONT BRAKE Custom Avid Elixir 3 R SL, hydraulic disc, tool-less reach adjust, alloy backed organic pads, G3 Clean Sweep rotor, S/M: 185mm, L/XL: 203mm
BRAKE LEVERS Avid Elixir 3 SL hydraulic, tool-less reach adj.
REAR BRAKE Custom Avid Elixir 3 R SL, hydraulic disc, tool-less reach adjust, alloy backed organic pads, G3 Clean Sweep rotor, 185mm rotor
PEDALS Alloy platform, 9/16""
HEADSET 1 1/8"" threadless, loose ball
SEAT BINDER 34.9mm clamp ID, 7050 hard annodized alloy collar w/ QR, black
FRAME M4 alloy, double ORE down tube, DMD front derailleur mount, sealed cartridge bearing pivots, bolt on cable guides, replaceable hanger, 150mm travel


Geometry Chart

- Geometry

  S M L XL
Crank Length 170mm 175mm 175mm 175mm
Stem Length 60mm 60mm 75mm 90mm
Seatpost Length 350mm 350mm 400mm 400mm
Handlebar Width 720mm 720mm 720mm 720mm
Reach 428mm 446mm 475mm 495mm
Stack 575mm 581mm 600mm 620mm
Chainstay Length 423mm 423mm 423mm 423mm
Top Tube Length (Actual) 553mm 574mm 606mm 632mm
Ground-Top 904mm 910mm 926mm 948mm
Top Tube Length (Horizontal) 565mm 586mm 620mm 645mm
Head Tube Angle - Low Setting 67° 67° 67° 67°
Standover Height 740mm 752mm 759mm 765mm
Head Tube Height 102mm 108mm 128mm 150mm
Wheel Base 1138mm 1159mm 1196mm 1223mm
Seat Tube Angle (Actual) - Low Setting 73° 73° 73° 73°
Seat Tube Angle (Effective) - Low Setting 76° 76° 76° 76°
Seat Tube Length - Center to Top 420mm 444mm 484mm 535mm
Bottom Bracket Height - Low Setting 345mm 345mm 345mm 345mm