Enter your ZIP code so we can provide the most accurate inventory and delivery information.
P.3
FRAME
P. Series A1 Premium Aluminum, double-butted ORE DT, forged HT/ISCG BB/chainstay yoke/horizontal dropouts, integrated chain tensioner and axle carrier, multispeed hardware, disc only, 6mm offset rear triangle
HEADSET
FSA PIG FS, 1-1/8"" Cr-Mo cup threadless w/ hollow cap bolt
SEAT BINDER
Forged Alloy single bolt clamp, 34.9mm
FORK
Marzocchi DJ1, 80mm, Alloy steerer and 32mm stanchions, 1pc. magnesium lower w/ 20mm through axle, cold forged alloy crown, open bath damping w/ rebound adj., air assist ""stiff"" coil spring w/ preload adj., disc only
RIMS
P.3 Disc, double wall disc w/ eyelets, 36h
FRONT HUB
Forged Alloy, cartridge bearing, 20mm thru-axle, machined Hi-Lo flanges and disc mount, 36h
REAR HUB
Forged alloy single speed cassette, machined flanges and disc mount, cartridge bearings, 36h, nutted 3/8"" axle, 1/8"" x 13t cog
SPOKES
2mm (14g) stainless
FRONT TIRE
Specialized Rhythm Lite Control, 26x2.3"", 60TPI, aramid bead
REAR TIRE
Specialized Rhythm Lite Control, 26x2.3"", 60TPI, aramid bead
INNER TUBES
Schraeder valve
CASSETTE
Single speed, Cr-Mo, 1/8"" x 13t
CHAIN
KMC KOOL K710SL, 1/2"" x 1/8""
CRANKSET
Fuse SL 2pc., heat treated Sanko Cr-Mo tubular arms, hollow 19mm Cr-Mo spindle
CHAINRINGS
CNC cut 6061, 28t, Motostar design w/ Pattented Wave engagement
BOTTOM BRACKET
Fuse SL Euro, Alloy threaded cup, 4x cartridge bearing, Machined alloy cone spacers
STEM
SBC Aggro Stem, 3D forged/CNC, 4-bolt, 35mm length
HANDLEBARS
Alloy riser bar, 60mm riser, 685mm wide, 8 degree back sweep, 6 degree up
GRIPS
Fuse BMX clamp-on, open end, 136mm
SADDLE
Specialized Fuse Lo Pro SL, super light foam, hollow 8mm Cr-Mo rails
SEATPOST
Alloy two bolt, no offset, micro adjust, 30.9mm
FRONT BRAKE
Avid Elixir 4, full hydraulic, alloy backed organic pads, G3 Clean Sweep rotor, 160mm
REAR BRAKE
Avid Elixir 4, full hydraulic, alloy backed organic pads, G3 Clean Sweep rotor, 140mm
BRAKE LEVERS
Avid Elixir 4 Hydraulic
PEDALS
Specialized Lo-Mag platform, magnesium body, heat treated 9/16"" Cr-Mo spindle, sealed cartridge bearings
* Weights based on production painted frames as pictured. Actual weights will vary based on colorway, frame size, and component variation. Specifications are subject to change without notice.
L | |
---|---|
Ground-Top | 875mm |
Bottom Bracket Height - Low Setting | 301mm |
Top Tube Length (Horizontal) | 595mm |
Head Tube Height | 108mm |
Head Tube Angle - Low Setting | 68.5° |
Seat Tube Angle (Actual) - Low Setting | 70° |
Seat Tube Angle (Effective) - Low Setting | 72° |
Top Tube Length (Actual) | 579mm |
Seat Tube Length - Center to Top | 370mm |
Wheel Base | 1063mm |
Standover Height | 677mm |
Stack | 574mm |
Reach | 409mm |
Chainstay Length | 394mm |
Crank Length | 175mm |
Handlebar Width | 680mm |
Stem Length | 40mm |
Seatpost Length | 300mm |