Enter your ZIP code so we can provide the most accurate inventory and delivery information.
P.3
FRAME
Specialized A1 Premium Aluminum, double-butted ORE DT, forged HT/ISCG BB/chainstay yoke/horizontal dropouts, integrated chain tensioner and axle carrier, multispeed hardware, disc only
HEADSET
FSA PIG FS, 1-1/8"" threadless
SEAT BINDER
Integrated w/ replaceable single bolt
FORK
RockShox Argyle 302, 80mm, 32mm Cr-Mo stanchions and alloy steerer, 1pc. magnesium lower for 20mm axle, rebound adj., ""stiff"" coil spring, disc only
FRONT TIRE
Specialized Rhythm Lite Control, 26x2.3"", 60TPI, aramid bead
REAR TIRE
Specialized Rhythm Lite Control, 26x2.3"", 60TPI, aramid bead
INNER TUBES
Specialized schraeder valve
RIMS
Specialized/Alex P.3 Disc, double wall disc w/ eyelets, 32h
FRONT HUB
Specialized, forged alloy, high/low flange, 36h, 20mm thru axle
REAR HUB
Specialized Hi Lo, forged alloy, 4x sealed cartridge bearing, ground race, cassette, nutted with 3/8"" axle, 36h
SPOKES
1.8mm (15g) stainless
CASSETTE
Joy Tech single speed conversion kit, 2 alloy spacers w/ 1/2"" x 1/8"" x 14t Cr-Mo cog
CHAIN
KMC KOOL K710SL, 1/2"" x 1/8""
CRANKSET
Fuse SL 2pc., heat treated Sanko Cr-Mo tubular arms, hollow 19mm Cr-Mo spindle
CHAINRINGS
CNC cut 6061, 28t, Motostar design w/ Pattented Wave type engagement
BOTTOM BRACKET
Fuse SL Euro, Alloy threaded cup, 4x cartridge bearing, 6x steel outside adjust spacer
STEM
Specialized aggro, 3D forged/CNC, 4-bolt, 35mm length
HANDLEBARS
Specialized alloy riser bar, 31.8mm, 55mm rise, 680mm wide, 8 degree back sweep, 8 degree up
GRIPS
Fuse BMX clamp-on, open end, 136mm
SADDLE
Specialized Fuse Lo Pro SL, super light foam, hollow 8mm Cr-Mo rails w/ rail brace tube
SEATPOST
Specialized alloy two bolt, no offset, micro adjust, 30.9mm
FRONT BRAKE
Avid Juicy 4 RSL, hydraulic disc, alloy backed brake pads, adapter and dual-piston caliper w/ 160mm G2 Clean Sweep Rotor
REAR BRAKE
Avid Juicy 3, hydraulic disc, alloy backed brake pads, adapter and dual-piston caliper w/ 160mm G2 Clean Sweep Rotor
BRAKE LEVERS
Avid Juicy 3
PEDALS
Specialized Lo-Pro Mag II, magnesium body, heat treated 9/16"" Cr-Mo spindle, sealed cartridge bearings, 9/16""
* Weights based on production painted frames as pictured. Actual weights will vary based on colorway, frame size, and component variation. Specifications are subject to change without notice.
L | |
---|---|
Bottom Bracket Height - Low Setting | 300mm |
Top Tube Length (Horizontal) | 595mm |
Head Tube Height | 108mm |
Head Tube Angle - Low Setting | 68.5° |
Seat Tube Angle (Actual) - Low Setting | 71° |
Top Tube Length (Actual) | 573mm |
Seat Tube Length - Center to Top | 368mm |
Wheel Base | 1059mm |
Standover Height | 675mm |
Chainstay Length | 394mm |
Crank Length | 175mm |
Handlebar Width | 680mm |
Stem Length | 40mm |
Seatpost Length | 300mm |