P.3
Part No.  

P.3

Part No.  22251
load-spinner
P.3
Overview
Technical Specifications
Geometry
Reviews
P. BIKES ARE A LIFESTYLE, born and bred with the integrity to push the limits of physics at your favorite jumps, streets and skate parks. All-over cold forgings, super short chainstays, high-riser jump bars and short extension stems make P. bikes durable and nimble enough to keep you moving up, not breaking down.
  • Platform pedals have sealed cartridge bearings, a magnesium body and Cr-Mo spindle for superior strength and light weight.
  • SBC P.3 disc rims are double-walled and eyeletted for maximum strength.
  • The P.3 frame is crafted from our A1 Premium Aluminum, with a double-butted ORE down tube and rear dropout system to accommodate single or multi-speed options.
  • The RockShox Argyle 80mm-travel fork is built to take abuse: 32mm Cr-Mo stanchions and one-piece magnesium lower, a 20mm thru-axle design and stiff coil spring.
  • Specialized 3D-forged Aggro stem is stiff and tough and accepts a 31.8mm diameter alloy riser bar: 680mm width and 8-degree back/upsweep for perfect positioning.
  • The Specialized Fuse BMX clamp-on grips have a 136mm micro flange and file pattern for added traction.
  • Avid Juicy 4 hydraulic disc brakes provide sure and smooth stopping power, dual-piston calipers with an 160mm G2 Clean Sweep rotor in front and 140mm G2 Clean Sweep rotor in back.
  • The KMC Kool chain features hollow pins and cutout links for shaving weight, with a Missing Link connector for easy removal and installation.
  • The Fuse SL two-piece crankset features Sanko Cr-Mo tubular arms and a hollow Cr-Mo spindle for unbelievable strength.
  • 28-tooth Motostar chainring features a Wave interface designed specifically for a stronger engagement to the KMC "Kool" chain.
  • 26x2.3-inch Rhythm Lite Control tires have a dual compound tread that rolls fast in the transition, with extra grip on the shoulders for precise cornering in the dirt.
  • The Specialized Fuse SL saddle uses hollow Cr-Mo rails and a rail brace for increased lateral strength.

Technical Specifications

DRIVETRAIN
CHAIN KMC KOOL K710SL, 1/2"" x 1/8""
BOTTOM BRACKET Fuse SL Euro, Alloy threaded cup, 4x cartridge bearing, 6x steel outside adjust spacer
CRANKSET Fuse SL 2pc., heat treated Sanko Cr-Mo tubular arms, hollow 19mm Cr-Mo spindle
CASSETTE Joy Tech single speed conversion kit, 2 alloy spacers w/ 1/2"" x 1/8"" x 14t Cr-Mo cog
CHAINRINGS CNC cut 6061, 28t, Motostar design w/ Pattented Wave type engagement
SUSPENSION
FORK RockShox Argyle 302, 80mm, 32mm Cr-Mo stanchions and alloy steerer, 1pc. magnesium lower for 20mm axle, rebound adj., ""stiff"" coil spring, disc only
WHEELS
FRONT HUB Specialized, forged alloy, high/low flange, 36h, 20mm thru axle
REAR HUB Specialized Hi Lo, forged alloy, 4x sealed cartridge bearing, ground race, cassette, nutted with 3/8"" axle, 36h
INNER TUBES Specialized schraeder valve
SPOKES 1.8mm (15g) stainless
FRONT TIRE Specialized Rhythm Lite Control, 26x2.3"", 60TPI, aramid bead
RIMS Specialized/Alex P.3 Disc, double wall disc w/ eyelets, 32h
REAR TIRE Specialized Rhythm Lite Control, 26x2.3"", 60TPI, aramid bead
COCKPIT
SADDLE Specialized Fuse Lo Pro SL, super light foam, hollow 8mm Cr-Mo rails w/ rail brace tube
SEATPOST Specialized alloy two bolt, no offset, micro adjust, 30.9mm
STEM Specialized aggro, 3D forged/CNC, 4-bolt, 35mm length
HANDLEBARS Specialized alloy riser bar, 31.8mm, 55mm rise, 680mm wide, 8 degree back sweep, 8 degree up
GRIPS Fuse BMX clamp-on, open end, 136mm
BRAKES
FRONT BRAKE Avid Juicy 4 RSL, hydraulic disc, alloy backed brake pads, adapter and dual-piston caliper w/ 160mm G2 Clean Sweep Rotor
BRAKE LEVERS Avid Juicy 3
REAR BRAKE Avid Juicy 3, hydraulic disc, alloy backed brake pads, adapter and dual-piston caliper w/ 160mm G2 Clean Sweep Rotor
ACCESSORIES
PEDALS Specialized Lo-Pro Mag II, magnesium body, heat treated 9/16"" Cr-Mo spindle, sealed cartridge bearings, 9/16""
FRAMESET
HEADSET FSA PIG FS, 1-1/8"" threadless
SEAT BINDER Integrated w/ replaceable single bolt
FRAME Specialized A1 Premium Aluminum, double-butted ORE DT, forged HT/ISCG BB/chainstay yoke/horizontal dropouts, integrated chain tensioner and axle carrier, multispeed hardware, disc only

Geometry

Geometry Chart

P. Series - Geometry

L
  L
Stem Length 40mm
Crank Length 175mm
Seatpost Length 300mm
Handlebar Width 680mm
Chainstay Length 394mm
Top Tube Length (Actual) 573mm
Top Tube Length (Horizontal) 595mm
Head Tube Angle - Low Setting 68.5°
Standover Height 675mm
Wheel Base 1059mm
Head Tube Height 108mm
Seat Tube Angle (Actual) - Low Setting 71°
Seat Tube Length - Center to Top 368mm
Bottom Bracket Height - Low Setting 300mm

Reviews