Expedition Low Entry
$440.00
Part No.  

Expedition Low Entry

$440.00
Part No.  65261
load-spinner
Expedition Low Entry
Overview
Technical Specifications
Geometry
Reviews
Around town or the campground, the Expedition Low Entry is comfortable, plush, and perfect for cruising paved and dirt roads. The 7-speed drivetrain will keep you pedaling efficiently on any terrain, while the low-entry frame improves convenience and confidence.
  • Specialized Body Geometry Contour grips for comfort and safety
  • 26", alloy double-wall rims for durability
  • Comfort saddle uses springs, dual-density foam on top and wide platform for comfort
  • A1 Premium Aluminum frame w/ Ground Control Geometry for stability and safety
  • Smooth-rolling Hemisphere 26" tires w/ flat protection and control on pavement or gravel
  • SR Suntour suspension fork w/ 63mm travel for confident handling on any surface

Technical Specifications

DRIVETRAIN
CHAIN KMC Z7, silent shift, 1/2""x3/32"", reusable Missing Link
BOTTOM BRACKET Square taper, cartridge bearings, 68mm
CRANKSET Forged alloy, w/ double chainguard
SHIFT LEVERS Shimano Tourney Revo-Shift, 7-speed, w/ optical display
CASSETTE Shimano MegaRange, 7-speed, 14-34
CHAINRINGS 42T
REAR DERAILLEUR Shimano Tourney, 7-speed
WHEELS
FRONT HUB Double-sealed, loose ball, QR, 32h
REAR HUB Alloy, freewheel type, sealed, QR, 32h
INNER TUBES Standard, Schrader valve
SPOKES Stainless, 14g
RIMS 26"", alloy double-wall, CNC sidewalls, pin joint, 32h
FRONT TIRE Specialized Hemisphere, Flak Jacket protection, 26x1.95""
REAR TIRE Specialized Hemisphere, Flak Jacket protection, 26x1.95""
COCKPIT
SADDLE Body Geometry Comfort, steel spring rails
TAPE Specialized Body Geometry Contour
SEATPOST Alloy, 2-bolt, micro-adjust, 27.2mm
STEM Quill stem, alloy die-cast, 2-bolt, 150mm
HANDLEBARS Specialized riser, alloy, 15-degree backsweep, 4-degree upsweep, 60mm rise, 25.4mm
BRAKES
FRONT BRAKE V-brake, die cast alloy, linear pull, 60mm 1 pc. pads
BRAKE LEVERS Die-cast alloy
REAR BRAKE V-brake, die cast alloy, linear pull, 60mm 1 pc. pads
ACCESSORIES
PEDALS Plastic body w/ rubber top, loose ball bearings, w/ reflectors
FRAMESET
HEADSET 1-1/8"" FSA Intelaset, threaded, Cr-Mo cups
SEAT BINDER Alloy, nylon/glass fiber washer, QR, 31.8mm
FORK SR Suntour NEX, alloy lowers, coil/MCU spring, Hi-Ten 28mm stanchions, 1-1/8"" steerer, preload adjust, 63mm travel
FRAME Specialized A1 Premium Aluminum, Ground Control Geometry, 26"" super low entry, formed tubes, forged dropouts w/ replaceable derailleur hanger

Geometry

Geometry Chart

Expedition - Geometry

S M L
  S M L
Crank Length 170mm 170mm 170mm
Seatpost Length 300mm 350mm 350mm
Handlebar Width 645mm 645mm 645mm
Wheelbase 1123mm 1138mm 1159mm
Seat-Tube Length, B-B Center to Top 370mm 425mm 480mm
Head-Tube Length 160mm 180mm 200mm
Top-Tube Length, Horizontal 610mm 625mm 640mm
Front-Center 630mm 650mm 665mm
Head-Tube Angle 68.5° 68.5° 68.5°
Fork Rake 40mm 40mm 40mm
Trail 89mm 89mm 89mm
Stand-Over Height 436mm 437mm 453mm
Chain-Stay Length 500mm 500mm 500mm
Seat-Tube Angle 67° 67° 67.5°
B-B Drop 59mm 59mm 59mm

Reviews