CruX Comp Disc
Part No.  

CruX Comp Disc

Part No.  
Please select an option
CruX Comp Disc
Technical Specifications
With disc brakes, the CruX Comp will let you hammer into turns and slow down on an instant even in the nastiest conditions. with race-optimized geometry, tapered head tube, internal cable routing, and Shimano Tiagra 10-speed components, the Comp is ready to race.
  • Cross racing-specific, E5 alloy, disc-compatible frame with tapered head tube assembly and OSBB is ultra tough and quick, shaped top tube provides easy shouldering
  • FACT carbon fork with tapered steerer is disc-ready powerful braking and provides strength, stiffness, and compliance for rough terrain
  • New 10-speed Shimano Tiagra STI shifters are smooth and precise, offering reliable performance and great value
  • Easily serviceable Alex S480 wheels are tough enough for nasty 'cross conditions

Technical Specifications

CHAIN New Shimano Tiagra 10-speed
BOTTOM BRACKET With crankset
CRANKSET FSA Omega compact BB30 ST
FRONT DERAILLEUR New Shimano Tiagra 10-speed
SHIFT LEVERS New Shimano Tiagra STI 10-speed
CASSETTE New Shimano Tiagra, 10-speed, 12-28t
REAR DERAILLEUR New Shimano Tiagra 10-speed
FRONT HUB Forged alloy Disc hub, 32h
REAR HUB Forged aluminum Disc hub, double sealed ball bearings, cassette, QR, 32h
INNER TUBES Lightweight, presta
SPOKES Stainless 14g
FRONT TIRE Specialized Tracer Sport, 60 TPI, wire bead, 700x33c
RIMS Alex S480, 32h
REAR TIRE Specialized Tracer Sport, 60 TPI, wire bead, 700x33c
SADDLE Body Geometry Phenom Comp, hollow Cr-Mo rails
TAPE Specialized Crux gel wrap
SEATPOST Specialized Sport, alloy, 27.2mm
STEM Specialized EliteSet, 3D forged alloy, 12-degree, 4-position adjustable, 4-bolt, 31.8mm clamp
HANDLEBARS Specialized CX Comp, alloy, short drop
FRONT BRAKE Avid BB5 disc, 160mm
REAR BRAKE Avid BB5 disc, 140mm
PEDALS Nylon flat test ride, loose ball, w/ reflectors
HEADSET 1-1/8"" upper and 1-1/2"" lower Cr-Mo cartridge bearings integrated, w/ headset, 20mm cone spacer, w/ 20mm of spacers
SEAT BINDER Alloy, 31.8mm
FORK Specialized FACT carbon, 1-1/2"" lower bearing, disc only
FRAME Specialized E5 aluminum, fully manipulated tubing, smooth weld, semi-compact race design, shaped TT, integrated headset, 1-1/2"" lower bearing, internal cable routing, OSBB


Geometry Chart

CruX - Geometry

  46 49 52 54 56 58 61
Crank Length 170mm 170mm 170mm 172.5mm 172.5mm 175mm 175mm
Stem Length 75mm 75mm 90mm 90mm 100mm 110mm 120mm
Handle-Bar Width 400mm 400mm 420mm 420mm 440mm 440mm 440mm
Reach 366mm 370mm 375mm 379mm 384mm 387mm 392mm
Stack 522mm 541mm 554mm 567mm 583mm 597mm 618mm
Wheelbase 1008mm 1009mm 1009mm 1016mm 1022mm 1025mm 1031mm
Seat-Tube Length, B-B Center to Top 460mm 490mm 520mm 540mm 560mm 580mm 610mm
Head-Tube Length 100mm 115mm 125mm 140mm 155mm 170mm 190mm
Top-Tube Length, Horizontal 510mm 516mm 537mm 549mm 557mm 570mm 587mm
Front-Center 593mm 595mm 595mm 601mm 606mm 609mm 615mm
Head-Tube Angle 69.5° 70.5° 71.5° 71.5° 72° 72.5° 73°
Stand-Over Height 764mm 782mm 795mm 809mm 825mm 841mm 862mm
Fork Rake 51mm 51mm 51mm 49mm 49mm 49mm 49mm
Trail 75mm 69mm 62mm 64mm 61mm 58mm 55mm
Chain-Stay Length 425mm 425mm 425mm 425mm 425mm 425mm 425mm
Seat-Tube Angle 75.5° 75.5° 74° 73.5° 73.25° 73° 72.5°
B-B Drop 71mm 71mm 71mm 69mm 69mm 67mm 67mm
Seat-Post Length 300mm 300mm 300mm 350mm 350mm 350mm 350mm