Carmel 2 Low Entry
Part No.  

Carmel 2 Low Entry

Part No.  23217
Carmel 2 Low Entry
Technical Specifications
Riders looking for nothing more than carefree, open-air goodness will find the plush, cruiser-style CARMEL is the perfect partner for beaches, bike paths, dirt and gravel trails.
  • (Chaincase) Aluminium Chain Guard for Internal gearing
  • Shimano internally geared 3-speed hub for quick, easy shifting and low maintenance
  • Globe Comfort Plus saddle uses springs and a wide platform for over-the-top comfort
  • High-volume Specialized Hemisphere 26-inch tires use Flak Jacket protection to ward off flats
  • Steel fork is a simple, durable and maintenance-free alternative to overbearing suspension forks
  • Women's Body Geometry Comfort grips (with integrated bell) alleviate hand pain and tingling fingers
  • Globe A1 Premium Aluminum frame with Ground Control geometry for an upright, stable seating position

Technical Specifications

SEAT BINDER Forged alloy
HEADSET 1-1/8"" threaded, sealed loose ball bearings
FORK Globe straight-blade steel fork
FRAME Globe A1 Premium Aluminum, ground control geometry, 26"" low entry comfort frame, formed tubes w/ integrated kickstand mount, forged dropouts w/ replaceable hanger
FRONT HUB Forged alloy w/ steel nutted axle, dual lock nuts
REAR HUB Shimano Internal 3-Speed
INNER TUBES Schraeder valve
SPOKES 2mm (14g) stainless
RIMS Alex Z-1000, 26"", single wall, 36h
FRONT TIRE Specialized Hemisphere, 26x1.95"", 60TPI, wire bead w/ Flak Jacket protection
REAR TIRE Specialized Hemisphere, 26x1.95"", 60TPI, wire bead w/ Flak Jacket protection
BOTTOM BRACKET Cartridge bearing, square spindle with crank stop right side and capless bolts
CHAIN KMC, Internal 8-speed, 1/2x1/8""
CRANKSET Sugino EX-1 aluminum, w/ alloy chainguard
CASSETTE See rear hub
SHIFT LEVERS Shimano Nexus, 3-speed
CHAINRINGS 38T w/ chainguard
SADDLE Comfort Plus with dual density foam and springs for extra comfort
TAPE Women's Body Geometry Comfort, closed end, 92/132mm including bell
SEATPOST Alloy, 2-bolt forged head, 12.5mm offset, 27.2mm
HANDLEBARS Hi-Ten Comfort riser bar, 25.4mm, 60mm rise, 620mm wide, 15 degree back sweep, 5 degree up
STEM Ground control, 4-bolt, alloy head/Cr-Mo quill, 25.4mm clamp
BRAKE LEVERS Alloy 4-finger, kraton lever pad, for twist shifter
FRONT BRAKE Alloy linear pull, 1pc. pad
REAR BRAKE Alloy linear pull, 1pc. pad
PEDALS Composite platform body, sealed loose ball bearings


Geometry Chart

Carmel - Geometry

Wheelbase 1135mm 1150mm
Seat-Tube Length, B-B Center to Top 370mm 425mm
Head-Tube Length 200mm 220mm
Top-Tube Length, Horizontal 610mm 625mm
Front-Center 642mm 656mm
Head-Tube Angle 68.5° 68.5°
Fork Rake 51mm 51mm
Trail 79mm 79mm
Stand-Over Height 425mm 426mm
Chain-Stay Length 500mm 500mm
Seat-Tube Angle 67° 67.5°
B-B Drop 59mm 59mm
Seat-Post Length 0mm 0mm