BigHit I
Part No.  

BigHit I

Part No.  
Please select an option
BigHit I
Technical Specifications
Shred everything on the trail without shredding everything in your wallet with the BigHit built from sound materials, advanced suspension technology, and quality components.
  • 31.8 direct-mount Specialized DH 4-bolt stem is forged for the extra durability needed to handle huge hits
  • Low-rise 750mm alloy bars with 8-degree backsweep and 31.8mm clamp for serious control to handle really big hits
  • X-Fusion 170mm-travel coil-sprung fork with adjustable rebound and 20mm thru-axle for pinpoint steering and control
  • Mega-solid M4 alloy FSR frame with full cartridge bearing pivots and ORE tube construction delivers 7.5" of trail-slaying rear wheel travel
  • Stop on a dime with consistent, fade-free Avid Juicy 3 hydraulic disc brakes and ergo levers with G3 Clean Sweep rotors: 203mm front, 185mm back
  • Custom X-Fusion Vector R coil rear shock with adjustable rebound works with the bike's FSR design to keep the rear wheel planted for aggressive riding

Technical Specifications

CHAIN KMC X8, 8-speed, w/ reuseable Missing Link
BOTTOM BRACKET Truvativ Howitzer XR, oversize sealed outboard cartridge bearing, 73mm shell
CRANKSET Truvativ Ruktion, 170mm w/ SBC chain guide
SHIFT LEVERS SRAM X.4, 8-speed, trigger
CASSETTE SRAM PG-830, 8-speed, 11-32t
CHAINRINGS 34t steel, 4-bolt, compact 104mm pattern
REAR DERAILLEUR SRAM X.7, 9-speed, short cage
FORK X-Fusion Vengeance, coil spring, tapered alloy steerer, reb adj., 20mm thru-axle, 170mm travel
REAR SHOCK Custom X-Fusion Vector R, coil over w/piggy back, adj. rebound, Spring rate S: 400, M: 450, L: 500 8.5x2.5""
SADDLE Specialized Demo, 7mm hollow Cr-Mo rails
SEATPOST 6061 alloy, two bolt micro adjust, no offset, 30.9mm, 300mm
STEM Specialized DH, forged, 35mm length, 4-bolt, 31.8mm
HANDLEBARS Specialized DH low-rise bar, 6061 alloy, 750mm wide, 8 degree backsweep, 6 degree up, 31.8mm
GRIPS Specialized lock-on, S/M: Grappler, Other: Rocca
FRONT HUB Specialized Hi Lo disc, laser-etched logo, sealed cartridge bearing, 20mm thru-axle, 36h
REAR HUB Specialized Disc, bolt-on 135mm, 36h
INNER TUBES Schraeder valve 26x2.4/2.75, 1.2mm thick
SPOKES 2.0mm (14g) stainless
RIMS P-Disc, 32mm, 36h
FRONT TIRE Specialized Butcher SX, 60 TPI, aramid bead, soft dual compound, 26x2.3""
REAR TIRE Specialized Butcher SX, 60 TPI, aramid bead, soft dual compound, 26x2.3""
FRONT BRAKE Avid Juicy 3, hydraulic disc, metallic pads, G3 Clean Sweep rotor, 203mm rotor
BRAKE LEVERS Avid Juicy 3 hydraulic
REAR BRAKE Avid Juicy 3, hydraulic disc, metallic pads, G3 Clean Sweep rotor, 185mm rotor
PEDALS Alloy platform, 9/16""
HEADSET 1-1/8"" loose cage upper bearing and 1.5"" alloy lower loose-cage bearing
SEAT BINDER 34.9mm clamp ID, alloy collar w/ QR, black
FRAME M4 tubing ORE TT/DT, tapered HT, ISCG mount, asymetrical rear triangle, full cartridge bearing pivots , 7.5"" travel


Geometry Chart

Bighit - Geometry

  S M L
Crank Length 170mm 170mm 170mm
Stem Length 40mm 40mm 40mm
Seatpost Length 300mm 300mm 300mm
Handlebar Width 750mm 750mm 750mm
Reach 404mm 427mm 449mm
Stack 595mm 595mm 595mm
Chainstay Length 426mm 426mm 426mm
Top Tube Length (Actual) 537mm 554mm 576mm
Ground-Top 960mm 960mm 960mm
Top Tube Length (Horizontal) 563mm 586mm 608mm
Head Tube Angle - Low Setting 65.5° 65.5° 65.5°
Standover Height 758mm 769mm 770mm
Head Tube Height 120mm 120mm 120mm
Wheel Base 1162mm 1185mm 1207mm
Seat Tube Angle (Actual) - Low Setting 71° 71° 71°
Seat Tube Angle (Effective) - Low Setting 75° 75° 75°
Seat Tube Length - Center to Top 394mm 419mm 458mm
Bottom Bracket Height - Low Setting 365mm 365mm 365mm