It took my dealer a week or two to figure out why my front fork wasn't working on my Turbo Tero 3.0. It turns out the bolts provided which mount the front fender to each tube of the fork were too long. The uppers would hit the bolts and would not compress. It actually caused damage to my fork, but my dealer was about to make repairs. Beware of this. My bike was one several at the dealer with this issue, so I was told.

The quality of the parts supplied with this accessory kit is great. Installation is a bit involved, so make sure you have plenty of time to do it (a couple hours should easily get it done). Run wire for rear light before attaching the fender to the rack (and do that before putting it on the bike, of course).

Everything worked except for two major issues. The front fender for my Turbo Tero 3.0 has two mounting points position on the lower portion of the front suspension fork. The bolts for these mounting points are too long and insert too deeply into the lowers of the suspension fork. As a result, the bolts jammed/locked the fork. New short bolts had to be acquired in order for the fork to work again.

The rack, fenders and light really add to the versatility of the bike.

great for commuting on those wet and rainy days. No splash on the casual work clothes.

Installation instructions are not complete. My kit is missing screws for the front fender. Rear fender instructions states that inside of fender has indications where to drill 6mm hole based on bike size, there aren’t any on my fender.