Demo 8 I

2012 Demo 8 I

Good luck finding a better high-performance downhill bike than this value-packed rig. With 200mm of front and rear travel, a custom Fox Van RC shock, and a RockShox RC fork, this machine is one well-thought-out downhill setup.

Tekniset tiedot

FRAMESET

FRAME

M5 manipulated alloy, compact race design, 1-1/2"" forged HT, ISCG 05 mount, cartridge bearing rear shock mount, rear derailleur protector, 200mm travel

HEADSET

1-1/2"" integrated for 1-1/8"" steerer, cartridge bearings

SEAT BINDER

34.9mm clamp ID, 7050 hard anodized alloy collar, single bolt

WHEELS

RIMS

Roval DH 26, 30mm wide w/eyelets, 32h

FRONT HUB

Specialized Hi Lo disc, laser-etched logo, sealed cartridge bearing, 20mm thru-axle, 32h

REAR HUB

Specialized Hi Lo disc, 150mm, hollow 12mm Cr-Mo axle w/ RD guard, 32h

SPOKES

DT Swiss Industry 2.0, (14g) stainless

FRONT TIRE

Specialized Butcher DH, wire bead, soft dual-compound, 26x2.3""

REAR TIRE

Specialized Butcher DH, wire bead, soft dual compound, 26x2.3""

INNER TUBES

Presta valve 26x2.4/2.75, 2.25mm thick

SUSPENSION

REAR SHOCK

Custom Fox Van RC, coil over w/piggy back, compression and rebound adj., 9.5x3"", XS: 300, S:350, M:400, L:450

FORK

RockShox Boxxer RC, alloy steerer, external compression and rebound adj., 20mm Maxle DH thru-axle, 200mm travel

DRIVETRAIN

REAR DERAILLEUR

SRAM X9, 10-speed, short cage

SHIFT LEVERS

SRAM X7, 10-speed, aluminum trigger, w/MatchMaker clamp

CASSETTE

Shimano Tiagra, 10-speed, 11-25t

CHAIN

KMC X-10, 10-speed, w/ reusable Missing Link, nickel plates

CRANKSET

Custom SRAM Descendant PF30, 7050 alloy arms, with Gamut P-30 chain guide

BOTTOM BRACKET

SRAM PF30 DH, 83mm shell

COCKPIT

SEATPOST

6061 alloy, two bolt micro adjust, no offset, 30.9mm, 300mm

STEM

Specialized Direct-Mount stem, 40mm length, 31.8mm, 4-bolt, forged

HANDLEBARS

Specialized Demo low-rise bar, 7050 alloy, 750mm wide, 8º backsweep, 6º upsweep, 31.8mm

GRIPS

Specialized lock-on, S/M: Grappler, Others: Grappler XL

SADDLE

Specialized DH, 8mm hollow Cr-Mo rails

BRAKES

FRONT BRAKE

Custom Avid Elixir 7, hydraulic disc, tool-less reach adj., metallic pad, HS-1 rotor, 200mm rotor

REAR BRAKE

Custom Avid Elixir 7, hydraulic disc, tool-less reach adj., metallic pad, HS-1 rotor, 180mm rotor

BRAKE LEVERS

Custom Avid Elixir 7 hydraulic, tool-less reach adj., w/MatchMaker clamp

ACCESSORIES

PEDALS

Specialized Benies, low profile with removable pins

* Painotiedot perustuvat kuvassa näkyvien tuotantomaalattujen runkojen painoihin. Todelliset painot vaihtelevat värityksen, rungon koon ja komponenttien vaihtelun mukaan. Tekniset tiedot ovat muutoksen alaisia ilman erillistä ilmoitusta.

Geometria

	XS	S	M	L
Ground-Top	936mm	936mm	936mm	936mm
Bottom Bracket Height - Low Setting	343mm	343mm	343mm	343mm
Top Tube Length (Horizontal)	540mm	560mm	580mm	597mm
Head Tube Height	112mm	112mm	112mm	112mm
Head Tube Angle - Low Setting	64°	64°	64°	64°
Seat Tube Angle (Actual) - Low Setting	62°	62°	62°	62°
Seat Tube Angle (Effective) - Low Setting	76°	76°	76°	76°
Top Tube Length (Actual)	485mm	504mm	517mm	530mm
Head Tube Angle - High Setting	64.8°	64.8°	64.8°	64.8°
Bottom Bracket Height - High Setting	353mm	353mm	353mm	353mm
Seat Tube Angle (Actual) - High Setting	62.8°	62.8°	62.8°	62.8°
Seat Tube Angle (Effective) - High Setting	76.8°	76.8°	76.8°	76.8°
Seat Tube Length - Center to Top	394mm	394mm	419mm	458mm
Wheel Base	1151mm	1171mm	1191mm	1208mm
Standover Height	717mm	717mm	722mm	731mm
Stack	593mm	593mm	593mm	593mm
Reach	390mm	410mm	430mm	447mm
Chainstay Length	421mm	421mm	421mm	421mm
Crank Length	165mm	165mm	165mm	165mm
Handlebar Width	750mm	750mm	750mm	750mm
Stem Length	50mm	50mm	50mm	50mm
Seatpost Length	300mm	300mm	300mm	300mm