If rippin' it up slopestyle or going huge at the local dirt jumps is your thing, the P.Slope is your bike. Featuring a tough, single-pivot, full suspension chassis and concentric bottom bracket, the P.Slope offers just enough rear travel to take the edge off the big hits while still riding like a hardtail.
The P.Slope spec includes a RockShox Pike DJ 26" fork, FOX FLOAT rear shock with 85mm of travel and a DPS damper, and powerful, SRAM Level T brakes to slow you down after your re-entry back to Earth.
- The frame is constructed from A1 Premium Aluminum in order to keep the overall weight at a minimum, while also ensuring that the bike is plenty tough to take a hit. And when it comes to cool features that make the difference, you get forged horizontal dropouts and integrated chain tensioners to keep the rear wheel locked in place, ISCG 05 to run chainguides, and a tough, forged bottom bracket shell.
- The RockShox Pike DJ fork includes the same stout 35mm chassis as its big brother, along with the revolutionary Charger damper and Solo Air system. The only real difference is in its 110mm of travel. But what does this mean for you? It means that you get a stiff construction that'll power through berms, and serve-up loads of bottom-out progression upon landing.
- The SRAM Level T hydraulic disc brakes provide ample stopping power, while also keeping overall weight to a minimum.
|BOTTOM BRACKET||BB30 BB, 2-piece, 73mm shell|
|CHAIN||KMC K1SL, single-speed, 1/2x3/32"|
|CRANKSET||Stout DJ PRO, 30mm alloy spindle, 170mm|
|FORK||RockShox Pike DJ 26", Solo Air spring, external rebound, Motion Control low-speed compression, 15x100mm Maxle® thru-axle, 110mm of travel|
|REAR SHOCK||FOX FLOAT w/ DPS damper, 200x50mm, 85mm of travel|
|SADDLE||Soder Dirt, steel rails|
|SEAT BINDER||Alloy, single-bolt, 34.9mm|
|SEATPOST||Specialized 2-bolt head, forged alloy, 8mm offset, micro-adjust, 30.9mm|
|HANDLEBARS||Specialized P.Series MTB Dirt, 6061 alloy, 9-degree backsweep, 6-degree upsweep, 38mm rise, 750mm width, 31.8mm clamp|
|STEM||Specialized P.Series, 4-bolt, 40mm|
|GRIPS||Specialized P.Grip, lock-on|
|FRONT HUB||P.Series Dirt Jump, sealed cartridge bearings, high-low flange, 15x100mm spacing, 32h|
|REAR HUB||P.Series Dirt Jump, sealed cartridge bearings, 10mm Cr-Mo axle, 32h|
|INNER TUBES||Schrader, 40mm valve|
|RIMS||P.Series 26" disc, 26.4mm internal width, 32h|
|FRONT TIRE||Renegade Slopestyle, 60 TPI, wire bead, 26x2.1"|
|REAR TIRE||Renegade Slopestyle, 60 TPI, wire bead, 26x2.1"|
|FRONT BRAKE||SRAM Level T, hydraulic disc, 160mm|
|REAR BRAKE||SRAM Level T, hydraulic disc, 160mm|
|PEDALS||Specialized Platform, nylon body, ball bearing, Cr-Mo, 9/16" spindle|
|FRAME||Specialized A1 Premium Aluminum, concentric bottom bracket, fully butted tapered head tube, forged BB30 bottom bracket shell, integrated ISCG 05 tabs, forged horizontal dropouts, integrated chain tensioners, 85mm of travel|
P. Series - Geometría
|Largo de biela||170mm|
|Largo de avance||40mm|
|Largo de poste de asiento||150mm|
|Ancho de manubrio||750mm|
|Largo de tubo superior, Horizontal||541mm|
|Distancia entre ejes||1070mm|
|Largo de vaina inferior||389mm|
|Ángulo de tubo de asiento||78.5°|
|Ángulo de tubo de dirección||69.5°|
|Seat Tube Length||355mm|
|Largo de tubo de dirección||123mm|
|Bike Standover Height||712mm|
|Fork Length, Full||493mm|