Enter your ZIP code so we can provide the most accurate inventory and delivery information.
Rockhopper SL Expert
FRAME
Specialized M4 fully manipulated alloy frame, fully butted, ORE DT, asymmetrical seat stays, forged dropouts w/ replaceable derailleur hanger, disc only
HEADSET
1-1/8"" threadless, Campy style semi-cartridge bearings
SEAT BINDER
Forged alloy QR, brass washer
FORK
RockShox Recon SLite, 80/100mm, 1 piece magnesium lower, alloy steerer, 32mm alloy stanchions, coil spring, preload and rebound adj. w/ LO
RIMS
DT-Swiss 445D, 26"", alloy double wall disc, pin joint, eyelets, 28h front and 32h rear
FRONT HUB
Forged alloy, hi/low flange, double sealed, ground race, machined disc mount, 28h
REAR HUB
Forged alloy, double sealed, ground race, machined disc mount, cassette, 32h
SPOKES
2mm (14g) stainless
FRONT TIRE
Specialized Fast Trak LK Control, 26x2.0"", 60TPI, tubeless ready aramid bead
REAR TIRE
Specialized Fast Trak LK Control, 26x2.0"", 60TPI, tubeless ready aramid bead
INNER TUBES
Schraeder valve
FRONT DERAILLEUR
Shimano Deore, 34.9mm clamp, top swing, bottom pull
REAR DERAILLEUR
Shimano RD-M772 Deore XT Shadow, long cage
SHIFT LEVERS
Shimano SL-M531 Deore trigger
CASSETTE
Shimano HG50, 9-speed, 11-34t
CHAIN
KMC X9 w/ reuseable Missing Link
CRANKSET
Shimano FC-M521, Hollowtech, Octalink spline
CHAINRINGS
44A x 32S x 22S replaceable
BOTTOM BRACKET
Shimano BB-ES25, Octalink spline, cartridge bearing, 68mm x 118mm
STEM
3D forged alloy, reverse 4-bolt, 7 degree rise, 31.8mm clamp
HANDLEBARS
Butted alloy riserbar, 25mm rise, 660mm wide, 8 degree back sweep, 7 degree up sweep
GRIPS
Specialized Enduro, dual compound Kraton, no flange, 131mm
SADDLE
Specialized Rockhopper XC, Body Geometry, 143mm width, front and rear bumpers
SEATPOST
Alloy two bolt, 12.5mm offset, micro adjust, 30.9mm
FRONT BRAKE
Avid Elixir 4 hydraulic disc, alloy backed organic pads, 160mm G3 Clean Sweep rotor
REAR BRAKE
Avid Elixir 4 hydraulic disc, alloy backed organic pads, 160mm G3 Clean Sweep rotor
BRAKE LEVERS
Avid Elixir 4
PEDALS
Alloy body and cage, 9/16""
* Weights based on production painted frames as pictured. Actual weights will vary based on colorway, frame size, and component variation. Specifications are subject to change without notice.
13 | 15 | 17 | 19 | 21 | 23 | |
---|---|---|---|---|---|---|
Ground-Top | 304mm | 304mm | 304mm | 304mm | 304mm | 304mm |
Bottom Bracket Height - Low Setting | 304mm | 304mm | 304mm | 304mm | 304mm | 304mm |
Top Tube Length (Horizontal) | 545mm | 565mm | 590mm | 615mm | 640mm | 660mm |
Head Tube Height | 120mm | 120mm | 130mm | 140mm | 160mm | 180mm |
Head Tube Angle - Low Setting | 70° | 70° | 70° | 70° | 70° | 70° |
Seat Tube Angle (Actual) - Low Setting | 73° | 73° | 73° | 73° | 73° | 73° |
Top Tube Length (Actual) | 541.02mm | 547.8mm | 568.11mm | 589.91mm | 615.22mm | 638.08mm |
Seat Tube Length - Center to Top | 330mm | 381mm | 432mm | 483mm | 533mm | 584mm |
Wheel Base | 1030mm | 1050mm | 1076mm | 1102mm | 1128mm | 1149mm |
Standover Height | 698mm | 730mm | 773mm | 806mm | 842mm | 878mm |
Chainstay Length | 426mm | 426mm | 426mm | 426mm | 426mm | 426mm |
Crank Length | 170mm | 170mm | 175mm | 175mm | 175mm | 175mm |
Handlebar Width | 640mm | 640mm | 640mm | 640mm | 640mm | 640mm |
Stem Length | 60mm | 60mm | 75mm | 75mm | 90mm | 90mm |
Seatpost Length | 350mm | 350mm | 350mm | 400mm | 400mm | 400mm |