If rippin' it up slopestyle or going huge at the local dirt jumps is your thing, the P.Slope is your bike. Featuring a tough, single pivot, full suspension chassis and concentric bottom bracket, the P.Slope offers just enough rear travel to take the edge off the big hits while still riding like a hardtail.
The P.Slope spec includes a RockShox Pike DJ fork, FOX FLOAT rear shock with 85mm of travel and a DPS damper, and powerful, SRAM Level T brakes to slow you down after your re-entry back to Earth.
- The frame is constructed from A1 premium aluminum in order to keep the overall weight at a minimum, while also ensuring that the bike is plenty tough to take a hit. And when it comes to cool features that make the difference, you get forged horizontal dropouts and integrated chain tensioners to keep the rear wheel locked in place, ISCG 05 to run chainguides, and a tough, forged bottom bracket shell.
- The RockShox Pike DJ fork includes the same stout 35mm chassis as its big brother, along with the revolutionary Charger damper and Solo Air system. The only real difference is in its 100mm of travel. But what does this mean for you? It means that you get a stiff construction that'll power through berms, and serve-up loads of bottom-out progression upon landing.
- The SRAM Level T hydraulic disc brakes provide ample stopping power, while also keeping overall weight to a minimum.
|CHAIN||KMC K810SL, single-speed, 1/2x3/32""|
|BOTTOM BRACKET||BB30 BB, 2-piece, 73mm shell|
|CRANKSET||Stout DJ PRO crankset, 30mm alloy spindle, 170mm|
|FORK||RockShox Pike DJ 26"", Solo Air spring, alloy 1-1/8 to 1-1/12"" tapered steerer, 23mm alloy stanchions and mag lowers, external rebound, Motion Control low-speed compression, tooled floodgate, 15mm Maxle® thru-axle, 110mm travel|
|REAR SHOCK||FOX FLOAT w/ DPS damper, 200x50mm, 85mm of travel|
|FRONT HUB||P. Series Dirt Jump, alloy disc hub, sealed cartridge bearings,15x100mm thru-axle, 32h|
|REAR HUB||P. Series Dirt Jump, alloy disc hub, sealed cartridge bearings, single speed w/ 14t 3/32"" cog, 10mm Cr-Mo axle, 32h|
|INNER TUBES||Schrader valve|
|SPOKES||Stainless, 14g, black|
|RIMS||P. Series 26 disc, 18mm rim depth, 26.4mm internal width, 32h|
|FRONT TIRE||Renegade Slopestyle, 60 TPI, wire bead, 26x2.1""|
|REAR TIRE||Renegade Slopestyle, 60 TPI, wire bead, 26x2.1""|
|SADDLE||Soder Dirt, steel rails|
|SEATPOST||Alloy, 2-bolt clamp, 12.5mm offset, 30.9mm, anti-corrosion hardware|
|STEM||Forged Alloy, 31.8mm clamp, 40mm|
|HANDLEBARS||Specialized P.Series MTB Dirt, 6061 alloy, 9-degree backsweep, 6-degree upsweep, 38mm rise, 750mm width, 31.8mm clamp|
|GRIPS||Specialized P.Grip, lock-on|
|FRONT BRAKE||SRAM Level T, hydraulic disc, 160mm rotor|
|REAR BRAKE||SRAM Level T, hydraulic disc, 160mm rotor|
|PEDALS||Specialized Platform, nylon body, ball bearing, Cr-Mo, 9/16"" spindle|
|SEAT BINDER||Alloy, single-bolt, 34.9mm|
|FRAME||Specialized A1 Premium Aluminum, concentric bottom bracket, fully butted tapered head tube, forged BB30 bottom bracket shell, integrated ISCG '05 tabs, forged horizontal dropouts, integrated chain tensioners, 85mm of travel|
P. Series - Geometry
|Top Tube Length, Horizontal||541mm|
|Seat Tube Angle||78.5°|
|Head Tube Angle||69.5°|
|Seat Tube Length||355mm|
|Head Tube Length||123mm|
|Bike Standover Height||712mm|
|Fork Length, Full||493mm|