Demo 8 I Carbon
€46,999.00
Part No.:  

Demo 8 I Carbon

€46,999.00
Part No.:  129006
load-spinner
Demo 8 I Carbon
Overview
Technical Specifications
Geometry

Downhill racing is a whole different beast—with insane rock gardens, gnarly ruts and roots, crazy drops, and often uncontrollable speeds, you need to have as much confidence in your bike as you do in yourself. And the Demo 8 I Carbon gives you the confidence you need to get down the run as quickly as possible.

When it comes to the stiffness, light weight, and strength required for downhill, you just can't beat a carbon fibre frame construction. That's while you'll find some of our best carbon fibre, FACT 10m, was used to create the acclaimed Demo 8 I Carbon.

It's also been built off of our S3 650b geometry, ensuring a roomy top tube for added control, ultra-short, nimble chainstays, a low bottom bracket that keeps you feeling planted, and a slack front end that provides the utmost in responsive handling at speed.

For suspension, this Demo features 200mm up front via a RockShox BoXXer RC 650b and 200mm of travel at the rear controlled by our revolutionary Öhlins rear shock. Together, the combo ensures that you'll be able to rocket over any terrain with confidence.

And when you add in a build kit consisting of SRAM's powerful Guide R brakes, a durable one-by SRAM drivetrain, and our legendary Butcher & Slaughter DH tires, you start get the picture of why our Demo 8s have won so many races.

  • The frame features a full FACT 10m carbon fibre construction for low weight and heightened levels of strength and stiffness, which is amplified by its asymmetrical frame design that still leaves plenty of access. This has also been paired with our proven S3 Geometry that increases manoeuvrability and responsiveness, while the 200mm of travel at the rear makes the bike capable of taking on the biggest of hits in stride.
  • RockShox BoXXer RC 650b fork is purposefully designed for the most demanding terrain on earth. With 200mm of travel, Motion Control IS damping for maximum efficiency, and Power Buldge reinforced lower legs that allow oversized bushings for incredible stiffness, it'll leave you with nothing but confidence.
  • The clutched SRAM GX rear derailleur all but eliminates dropped chains, so you're able to rail through rock gardens while still being able to sprint out of them.

Technical Specifications

DRIVETRAIN
CHAIN SRAM PC-1031, 10-speed w/ PowerLink
BOTTOM BRACKET SRAM BB30, 83mm
CRANKSET Custom SRAM Descendant, BB30, 7050 alloy arms w/ Gamut bashguard, 165mm
SHIFT LEVERS SRAM X7, trigger
CASSETTE SRAM PG-1030, 10 speed, 11-36 last three cogs removed
CHAINRINGS SRAM, 36T
REAR DERAILLEUR SRAM GX, Type 2.1, short cage
SUSPENSION
FORK RockShox BoXXer Team 27.5, coil spring, S: Extra soft spring, M: Soft spring, L: Medium spring, XL: Firm spring, 200mm of travel, Charger Damper, compression adjust, rebound adjust, alloy steerer, 48mm offset, Maxle Lite DH
REAR SHOCK Custom Öhlins TTX, Twin-Tube design, high- and low-speed compression adjust, rebound adjust, 9.5x3"
WHEELS
FRONT HUB Specialized disc, alloy flange & disc mount, sealed cartridge bearings, 20mm thru-axle, 32h
REAR HUB Specialized, sealed cartridge bearings, 12x135mm spacing, 32h
INNER TUBES Standard, Presta valve
SPOKES DT Swiss Industry, stainless, 3-cross, 2.0"
RIMS Roval 27.5, alloy, 24mm internal width
FRONT TYRE Butcher, DH casing, 27.5 b x2.5", 60 TPI, wire bead
REAR TYRE Butcher, DH casing, 27.5 b x2.3", 60 TPI, wire bead
COCKPIT
SADDLE Body Geometry Phenom Comp, hollow Cr-Mo rails, 143mm
SEATPOST Specialized, 6061 alloy, 2-bolt clamp, 0mm setback, 30.9mm
STEM Specialized Direct Mount DH Stem, two-piece, forged alloy, 45mm
HANDLEBARS Specialized DH, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 800mm, 31.8mm clamp
GRIPS Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness
BRAKES
FRONT BRAKE SRAM Code R, 4-piston caliper, hydraulic disc, metallic pads, 200mm rotor
REAR BRAKE SRAM Code R, 4-piston caliper, hydraulic disc, metallic pads, 180mm rotor
ACCESSORIES
PEDALS Specialized Bennies, 6061 alloy body, sealed cartridge bearings, 4.5mm removable pins
FRAMESET
SEAT BINDER Alloy, 36.9mm
FRAME FACT 10m carbon, S3 Geometry, carbon front triangle and seatstay, new Team alloy link, FACT IS construction, BB30, full internal cable routing, 135mm dropouts, lipped and sealed cartridge bearing pivots, replaceable derailleur hanger, 200mm of travel

Geometry

Geometry Chart

Demo - Geometry

  SHORT MEDIUM LONG EXTRA LONG
Handlebar Width 800mm 800mm 800mm 800mm
Saddle Width 143mm 143mm 143mm 143mm
Crank Length 165mm 165mm 165mm 165mm
Stem Length 45mm 45mm 45mm 45mm
Seatpost Length 300mm 300mm 300mm 300mm