Brug to fingre for at zoome

Roter skærm for et større billede

2018 S-Works Stumpjumper 29/6Fattie

0 Anmeldelser

When only the best will do, you need the ultimate trail bike. In other words, you…

Farve:

Satin Gloss Carbon/Hyper Green

Hvilken er min størrelse?

Imperial

Metrisk

Indtast din højde, så beregner vi din størrelse

Højde:

For et mere præcist resultat, så inkluder din skinnebenslængde

Vælg en Størrelse

Vælge farve og størrelse for at se lagerstatus hos forhandler

Ikke tilgængelig

Artiklen er ikke tilgængelig for “Find i nærheden”

Produktinformation

When only the best will do, you need the ultimate trail bike. In other words, you need the S-Works Stumpjumper 29/6Fattie. It reflects everything that we've learned over the years, and in our eyes, represents the pinnacle of trail performance.

Starting at the carbon layup, it features our highest-end FACT 11m for an ultra-lightweight, strong, and stiff construction. The carbon molding process also allowed us to revolutionize how you carry your trail essentials with the SWAT™ Door found at the down tube. This compartment will fit a tube, a tool, and pump without rattling or compromising the structural integrity of the frame. Further improving the ride, you'll also find an aggressive, trail-eating geometry that features ridiculously short chainstays, a roomy top tube, a low bottom bracket, a slacked out front end, and our proprietary Rx Trail Tune at the shock. And to make things even better, the Stumpy's design also allows you the opportunity to toggle between 29-inch wheels and 6Fattie wheels (not included), allowing the ultimate in configuration options for the trail at hand.

For the spec, we included a build that spares no expense and features a full SRAM XX1 Eagle groupset, SRAM Guide RS brakes, Öhlins front and rear suspension, and hand-built Roval Carbon wheels, so you get a bike that's ready for anything on the trail.

FACT 11m carbon fiber Trail Chassis with Stumpjumper FSR full carbon rear end blends stiffness with light weight to form the pinnacle of efficiency, while fully enclosed cable routing and an integrated SWAT™ Door create exceptional handling and zero-hassle storage.
The Öhlins RXF 36 fork was designed to be the gold standard in frontend suspension. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels.
The XX1 Eagle drivetrain is the pinnacle of shifting performance, floating through the 12-speed cassette with crisp, precise shifts.

Tekniske specifikationer

FRAMESET

FRAME

S-Works FACT 11m, full carbon chassis and rear end, 29/6Fattie Trail Geometry, SWAT™ Door integration, PF30 BB, fully enclosed internal cable routing, ManFu link, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 135mm of travel

SEAT BINDER

Alloy, 34.9mm

SUSPENSION

REAR SHOCK

Custom Öhlins STX, Single-Tube design, Rx Trail Tune, 3rd Chamber air spring technology, AUTOSAG, adjustable compression & rebound damping, 197x48mm

FORK

Öhlins RXF 36, 29/6Fattie, Twin-Tube design, air spring w/ adjustable 3rd chamber, adjustable high and low speed compression, adjustable rebound, 15x110mm thru-axle, 51mm offset, 150mm of travel

WHEELS

RIMS

Roval Traverse SL 29, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built

FRONT HUB

Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing, 24h

REAR HUB

Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h

SPOKES

DT Swiss Revolution

FRONT TIRE

Butcher, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"

REAR TIRE

Purgatory, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"

INNER TUBES

Standard, Presta valve

DRIVETRAIN

REAR DERAILLEUR

SRAM XX1 Eagle™, 12-speed

SHIFT LEVERS

SRAM XX1 Eagle, trigger, 12-speed

CASSETTE

SRAM X01 Eagle, 12-speed, 10-50t

CHAIN

SRAM XX1 Eagle, 12-speed w/ PowerLock

CRANKSET

SRAM XX1 Eagle, carbon, Boost™ 148, 170mm crankarm, 30mm spindle

CHAINRINGS

30T

BOTTOM BRACKET

SRAM PF30

COCKPIT

STEM

Syntace F109, 6-degree rise, 31.8mm clamp

HANDLEBARS

Specialized Trail, FACT carbon, 6-degree upsweep, 8-degree backsweep, 27mm rise, 780mm, 31.8mm

GRIPS

Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness

SADDLE

Body Geometry Henge Expert, hollow Ti rails, 143mm

SEATPOST

Command Post IRcc, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote SRL lever, 30.9mm, S: 100mm, M/L/XL: 125mm of travel

BRAKES

FRONT BRAKE

SRAM Guide RS carbon, hydraulic disc, organic pads, carbon lever, Guide S4 4-piston caliper, 200/180mm rotor

REAR BRAKE

SRAM Guide RS carbon, hydraulic disc, organic pads, carbon lever, Guide S4 4-piston caliper, 180/160mm rotor

ACCESSORIES

PEDALS

Specialized Platform, Cr-Mo, 9/16" spindle

*Vægte baseret på produktion af malede rammer som afbildet. Faktiske vægte vil variere baseret på farveskema, ramme størrelse og komponent variation. Specifikationer kan ændres uden varsel.

Geometri

	S	M	L	XL
Pedalarmslængde	170MM	170MM	170MM	170MM
Styrbredde	780mm	780mm	780mm	780mm
Frempindslængde	50MM	60MM	60MM	60MM
Sadelbredde	143mm	143mm	143mm	143mm
Sadelpinds længde	390mm	430mm	430mm	430mm
BB Height, 29x2.3"	338mm	338mm	338mm	338mm
Stellets stakhøjde	618mm	618mm	646mm	664mm
Stellængde (reach)	386mm	413mm	431mm	457mm
Kronrørslængde	125mm	145mm	95mm	95mm
Kronrørsvinkel	67°	67°	67°	67°
Krankboksens drop	33mm	33mm	33mm	33mm
Efterløb	96.5mm	96.5mm	96.5mm	96.5mm
Forgaffel Længde	560mm	560mm	560mm	560mm
Forgaflens fremløb	51mm	51mm	51mm	51mm
Krankboks – Fornavs afstand	687mm	714mm	744mm	777mm
Kædestagslængde	437mm	437mm	437mm	437mm
Akselafstand	1122mm	1149mm	1179mm	1212mm
Faktisk overrørslængde, horisontal	563mm	590mm	616mm	648mm
Skridthøjde	754mm	761mm	770mm	777mm
Sadelrørslængde	396mm	430mm	468mm	523mm
Sadelrørsvinkel	74°	74°	74°	74°