ENDURO EXPERT CARBON 29
Artikelnr.  

ENDURO EXPERT CARBON 29

Artikelnr.  106626
load-spinner
ENDURO EXPERT CARBON 29
Übersicht
Technische Spezifikationen
Geometrie
Unser Enduro Expert Carbon 29 bringt mit, was ein top All-Mountain-MTB leisten muss: effizient bergauf, aggressiv bergab. Der superstabile Rahmen aus FACT IS-X 11m Karbon besitzt überlegene Handlingeigenschaften dank spezieller 29er Geometrie: superkurze Kettenstreben, lange Front, niedriges Tretlager, flacher Steuerwinkel. Mit satten 155mm Federweg am Heck und 160mm vorne ebnest du so ziemlich jedes Gelände ein, dank neutralem, vollaktiven FSR-Hinterbau bist du bergauf wie bergab effizient unterwegs. Die Ausstattung mit exklusivem Öhlins custom Öl-Luft-Dämpfer, RockShox Pike RC 29, SRAM X1/X01 1x11 Antrieb und extrem stabilen Roval Traverse Laufrädern erfüllt höchste Anspruche. Unsere neue Command Post IRcc mit zusätzlicher Feinrasterung in 10 Stufen lässt dich die Sattelhöhe schnell per Lenkerhebel wählen. Viel Vergnügen beim Shredden!
  • FACT IS-X 11m carbon fiber chassis w/ M5 alloy rear end stands as the pinnacle of lightweight, efficient, and tough trail performance. It's been built off our 29 Geometry in order to provide an aggressive, well-rounded ride. And with internal Command Post IR routing and full cartridge bearing pivots, you get a bike that's clean, dependable, and ready for anything that trail has to offer.
  • RockShox Pike RC 29 fork features a 15mm Maxle Ultimate thru-axle, compression adjust, and 160mm of plush travel to take on big hits and bumpy terrain with supreme confidence and efficiency.
  • Roval Traverse 29 alloy wheels feature an ultra-wide design that allows for greater tire volume to increase stability and control, while the aluminum construction ensures ample strength for all mountain and trail abuse.
  • Command Post IRcc seatpost features up to 125mm of micro-adjust height adjustability for a more customizable position, ultimately resulting in more control and increased handling on both climbs and descents
  • The custom Öhlins single tube air shock at the rear features high- and low-speed compression, as well as low-speed rebound. You'll also find an extra-volume reservoir that allows for more oil, which results in more control and an ultra-plush ride quality.

Technische Spezifikationen

Амортизация
DÄMPFER Öhlins, single tube, 3rd Chamber air spring technology, adjustable compression & rebound damping, 215.9x57.2mm
GABEL RockShox Pike RC 29, Solo Air spring, 160mm travel, compression adjust, rebound adjust, tapered steerer, 46mm offset, 15mm Maxle Ultimate thru-axle
LAUFRÄDER
FELGEN Roval Traverse 29, alloy, disc, 29mm inner width, 24/28H
VORDERREIFEN Butcher Control 2Bliss Ready, 29x2.3", 60TPI, 2Bliss Ready, folding bead
HINTERREIFEN Slaughter Control 2Bliss Ready, 29x2.3"60TPI, folding bead
SPEICHEN DT Swiss Revolution
SCHLÄUCHE Standard, Presta valve
VORDERRADNABE Roval Traverse, 15/20mm thru-axle, 24h
HINTERRADNABE Roval Traverse 142+, SRAM XX1 XD driver body, 12mm thru-axle, 28h
ZUBEHÖR
PEDALE Resin Test Ride w/toe clips
KURBELN & KETTENBLÄTTER
INNENLAGER SRAM PF30, OS press-in bearings
SCHALTWERK SRAM X01 rear derailleur, X-Horizon, 11-speed
KASSETTE SRAM X01 cassette, 11-speed, 10-42t
KURBELGARNITUR Custom SRAM S-2200, carbon, PF30 spindle, 30T, 94mm BCD spider
SCHALTHEBEL SRAM X1, 11-speed, trigger
KETTE SRAM PC-X1 chain, PowerLock, 11-speed
COCKPIT & SITZEN
SATTELSTÜTZE Command Post IRcc, cruiser control technology, micro-adjust height adjustable, alien head design, bottom mount cable routing, remote adjust SRL lever, 30.9mm, S: 100mm of travel, M/L/XL: 125mm
LENKER Specialized, 7050 alloy, 8-backsweep, 6-upsweep, 10mm rise, 780mm width, 31.8mm clamp
LENKERGRIFFE Specialized Sip Grip, light lock-on, half-waffle, S/M: regular thickness, L/XL: XL thickness
SATTEL Body Geometry Henge Expert, hollow Ti rails, 143mm
VORBAU Specialized XC, 3D forged alloy, 4-bolt, 6-degree rise, 45/60/75/90/105mm
BREMSEN
HINTERRADBREMSE SRAM Guide RS lever, hydraulic disc, metallic pads, 180mm Centerline rotor, Guide S4 caliper
BREMSHEBEL SRAM Guide RS, alloy lever, reach adjust
VORDERRADBREMSE SRAM Guide R lever, hydraulic disc, metallic pads, Guide RS caliper, 200mm Centerline rotor
RAHMEN
SATTELSTÜTZKLEMME Alloy, 34.9mm
STEUERSATZ Hella Flush, 1-1/8" and 1-1/2" threadless, Campy style upper w/ 1-1/2" lower, cartridge bearings
RAHMEN FACT IS-X 11m carbon, 29 geometry, FACT IS construction, FACT carbon front triangle, M5 alloy rear triangle, tapered head tube, PF30 BB, internal Command Post IR routing, 142mm dropouts, full cartridge bearing pivots, replaceable derailleur hanger, 155mm travel

Geometrie

Geometry Chart

Enduro - Geometrie

M L XL
  M L XL
Vorbaulänge 45mm 60mm 60mm
Kurbellänge 170mm 175mm 175mm
Sattelstützen-Länge 380mm 430mm 430mm
Lenkerbreite 780mm 780mm 780mm
Reichweite (Reach) 425mm 445mm 465mm
Stack 632mm 641mm 655mm
Radstand 1163mm 1186mm 1212mm
Bike-Überstandshöhe 777mm 783mm 789mm
Steuerrohrlänge 110mm 120mm 135mm
Mitte Tretlager - Mitte Vorderachse 733mm 757mm 783mm
Fork Rake/Offset 51mm 51mm 51mm
Steuerrohrwinkel 67.5° 67.5° 67.5°
Nachlauf 99mm 99mm 99mm
Tretlagerhöhe 351mm 351mm 351mm
Kettenstreben (mm) 430mm 430mm 430mm
Gabellänge 571mm 571mm 571mm
Sitzrohrwinkel 75° 75° 75°
Tretlagerabsenkung 22mm 22mm 22mm
Sitzrohrlänge 445mm 470mm 520mm
Oberrohrlänge (horizontal) 594mm 611mm 641mm