Stumpjumper EVO Pro

We deliver! Just say when and how.

The Stumpjumper EVO Pro is a testament to full-gas trail performance. With an all-new design, from its S-Sizing geometry with an adjustable head tube angle, to its 150mm of shred-ready travel, this thing is a full-on ripper. And to top it off, it's build has been hand-picked to keep overall weight low and stoke high.

Fox Factory suspension? Check. Carbon 30mm-wide wheels? Check. XO1 Eagle drivetrain? Oh, yeah. With the Stumpjumper EVO Pro, you get all the goodies at a more palatable price.

Technical Specifications

Drivetrain

Chainrings

32T

Bottom Bracket

SRAM DUB, BSA 73mm, Threaded

Shift Levers

SRAM Eagle AXS Rocker Paddle

Rear Derailleur

SRAM X01 Eagle AXS

Crankset

SRAM X1 Carbon, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm

Cassette

SRAM XG-1295 Eagle, 10-52t

Chain

SRAM X01 Eagle, 12-speed

Frameset

Seat Binder

Alloy, 38.6mm

Frame

FACT 11m carbon chassis and rear-end, asymmetrical design, 29/27.5" Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel

Cockpit

Saddle

Bridge, 155/143mm, Hollow Ti-rails

Grips

Deity Lockjaw

Stem

Deity, 35.0mm

Handlebars

Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm

SeatPost

Bike Yoke, Revive Max, 34.9 (S1:120mm, S2-S3:150mm, S4-S5: 185mm, S6: 213mm)

Wheels & Tires

Front Tire

Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3"

Spokes

DT Competition Race

Rear Hub

DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h

Front Hub

DT Swiss 350, sealed cartridge bearings, 15x110mm spacing, 28h

Rear Tire

Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, 27.5 x 2.3"

Rims

Roval Traverse Carbon 29F/27.5R, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready

Inner Tubes

Standard, Presta Valve

Suspension

Fork

FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel

Rear Shock

FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1:210x50mm, S2-S6:210x55mm

Brakes

Rear Brake

SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm HS2

Front Brake

SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm HS2

Weight

13.86kg (30 lb, 8.9 oz)

Weight Size

* Weights based on production painted frames as pictured. Actual weights will vary based on colourway, frame size, and component variation. Specifications are subject to change without notice. // eslint-disable-line react/no-danger

Geometry

	S1	S2	S3	S4	S5	S6
Crank Length	165mm	170mm	170mm	170mm	170mm	175mm
Handlebar Width	800mm	800mm	800mm	800mm	800mm	800mm
Stem Length	35mm	35mm	35mm	35mm	50mm	50mm
Saddle Width	155mm	155mm	143mm	143mm	143mm	143mm
Seatpost Length	125 mm	160 mm	160 mm	185 mm	185 mm	213mm
Stack	613mm	617mm	626mm	635mm	644mm	654mm
Reach	408mm	428mm	448mm	475mm	498mm	528mm
Headtube Length	95mm	95mm	105mm	115mm	125mm	135mm
Headtube Angle	64.5°	64.5°	64.5°	64.5°	64.5°	64.5°
BB Height	335mm	340mm	340mm	340mm	340mm	340mm
BB Drop	40mm	35mm	35mm	35mm	35mm	35mm
Trail	131mm	131mm	131mm	131mm	131mm	131mm
Fork Length (full)	561mm	571mm	571mm	571mm	571mm	571mm
Fork Rake/Offset	44mm	44mm	44mm	44mm	44mm	44mm
Front Centre	732mm	756mm	780mm	809mm	838mm	873mm
Chainstay Length	436mm	436mm	436mm	436mm	446mm	446mm
Wheelbase	1165mm	1189mm	1214mm	1245mm	1283mm	1317mm
Top-tube Length (horizontal)	538mm	564mm	590mm	623mm	647mm	679mm
Bike Standover Height	733mm	764mm	763mm	762mm	767mm	770mm
Seat Tube Length	385mm	385mm	405mm	425mm	445mm	465mm
Seat Tube Angle	78°	77.6°	77.2°	76.9°	77°	77°
Max Seatpost Insertion	180mm	180mm	200mm	220mm	240mm	260mm
Min Seatpost Insertion	80mm	80mm	80mm	80mm	80mm	80mm