5
2 Bewertungen
Das S-Works Stumpjumper EVO ist nicht nur irgendein Trailbike. Nein, es ist eine…
Das S-Works Stumpjumper EVO ist nicht nur irgendein Trailbike. Nein, es ist eine wahre Shred-Maschine. Gebaut, um die krassesten Trails zu rocken. Felsen, Wurzeln, Sprünge, Drops – kein Problem für das EVO. Mit seinem völlig neuen Design, S-Sizing, verstellbarem Steuerrohrwinkel und 150 mm Federweg ist dieses Rig der absolute Burner. Das S-Works Stumpjumper EVO – es ist Zeit freizudrehen.
In echter S-Works Manier ist das S-Works Stumpjumper EVO bis ins kleinste Detail durchdacht. FOX Factory Federgabel und Dämpfer übernehmen die Absorption der Einschläge, während die SRAM Code Ultimate Vierkolbenbremse wenn nötig etwas Geschwindigkeit drosselt. Die komplett elektronische SRAM XX Eagle Gruppe rundet ohne leidige Kabel diesen beeindruckenden Aufbau ab.
What do you get when you pair a 29-inch front wheel with a 27.5-inch rear wheel? The Stumpjumper EVO S-Works, that’s what. With all of the traction and handling benefits of a 29er, but with a smaller, more maneuverable rear wheel, this mullet setup suits a more jibby, playful style. It’s right at home at the bike park, and is a total blast to cut loose with on the trail.
All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other.
Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant.
Rahmen
FACT 11m carbon chassis and rear-end, asymmetrical design, 29/27.5 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel
Sattelklemme
Alloy, 38.6mm
Dämpfer
FOX FLOAT X2 Factory, Rx Trail Tune, 2-position open/firm lever, HSC, LSC, HSR, and LSR adjustment, S1:210x50mm, S2-S6:210x55mm "
Gabel
FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel
Vorderradbremse
SRAM Code Ultimate Stealth, 4-piston caliper, hydraulic disc, 200mm HS2 Rotor
Hinterradbremse
SRAM Code Ultimate Stealth, 4-piston caliper, hydraulic disc, 200mm HS2 Rotor
Schalthebel
SRAM AXS POD Ultimate Controller
Schaltwerk
SRAM XX Eagle Transmission Derailleur
Kassette
SRAM XX Eagle SL Transmission Cassette, 12spd, 10-52T
Kette
SRAM XX Eagle SL Transmission Flattop Chain, 12spd
Kurbelgarnitur
SRAM XX Eagle, Carbon, with Aluminum Guards, DUB, 32T, S1:165mm, S2-S5: 170mm, S6: 175mm
Kettenblätter
32T
Tretlager
SRAM DUB WIDE, BSA 73mm, Threaded
Felgen
Roval Traverse SL 29F/27.5R, hookless carbon, 30mm inner width, 2Bliss Ready, hand-built, 28h
Vorderradnabe
Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing
Hinterradnabe
Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing
Speichen
DT Competition Race
Vorderreifen
Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3"
Hinterreifen
Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, 27.5 x 2.3"
Schläuche
Standard, Presta
Vorbau
OneUp Stem, 35mm bar bore
Lenker
OneUp Carbon, riser bar, 5-degree upsweep, 8-degree backsweep, 35mm rise, 800mm, 35.0mm
Lenkergriffe
Deity Lockjaw
Sattel
Bridge, 155/143mm, Hollow Ti-rails
Sattelstütze
RockShox Reverb AXS, 30.9, 1X remote, (S1:100mm, S2: 125mm, S3: 150mm, S4-S6: 170mm)
Gewicht
14.34kg (31lb, 9.8 oz)
Gemessene Rahmengröße
S4
*Gewichte basieren auf der Produktion lackierter Rahmen, wie abgebildet. Tatsächliche Gewichte variieren je nach Farbgebung, Rahmengröße und Komponentenvariation. Spezifikationen können ohne Vorankündigung geändert werden.
S1 | S2 | S3 | S4 | S5 | S6 | |
---|---|---|---|---|---|---|
Kurbellänge | 165mm | 170mm | 170mm | 170mm | 170mm | 175mm |
Lenkerbreite | 780mm | 800mm | 800mm | 800mm | 800mm | 800mm |
Vorbaulänge | 35mm | 35mm | 35mm | 42mm | 42mm | 50mm |
Sattelbreite | 155mm | 155mm | 143mm | 143mm | 143mm | 143mm |
Länge Sattelstütze | 100mm | 125mm | 150mm | 170mm | 170mm | 170mm |
Steuerrohrwinkel | 64.5° | 64.5° | 64.5° | 64.5° | 64.5° | 64.5° |
Mitte Tretlager - Mitte V.-Achse | 732mm | 756mm | 780mm | 809mm | 838mm | 873mm |
Reach | 408mm | 428mm | 448mm | 475mm | 498mm | 528mm |
Tretlagerhöhe | 335mm | 340mm | 340mm | 340mm | 340mm | 340mm |
Kettenstreben-Länge | 436mm | 436mm | 436mm | 436mm | 446mm | 446mm |
Nachlauf | 131mm | 131mm | 131mm | 131mm | 131mm | 131mm |
Radstand | 1165mm | 1189mm | 1214mm | 1245mm | 1283mm | 1317mm |
Tretlagerabsenkung | 40mm | 35mm | 35mm | 35mm | 35mm | 35mm |
Überstandshöhe | 733mm | 764mm | 763mm | 762mm | 767mm | 770mm |
Sitzrohrwinkel | 78° | 77.6° | 77.2° | 76.9° | 77° | 77° |
Gabelversatz / Offset | 44mm | 44mm | 44mm | 44mm | 44mm | 44mm |
Oberrohrlänge (horizontal) | 538mm | 564mm | 590mm | 623mm | 647mm | 679mm |
Einschub Sattelstütze maximal | 180mm | 180mm | 200mm | 220mm | 240mm | 260mm |
Einschub Sattelstütze minimal | 80mm | 80mm | 80mm | 80mm | 80mm | 80mm |
Steuerrohrlänge | 95mm | 95mm | 105mm | 115mm | 125mm | 135mm |
Gabellänge (komplett) | 561mm | 571mm | 571mm | 571mm | 571mm | 571mm |
Stack | 613mm | 617mm | 626mm | 635mm | 644mm | 654mm |
Sitzrohrlänge | 385mm | 385mm | 405mm | 425mm | 445mm | 465mm |
Weitere Sicherheitshinweise finden sich in den entsprechenden Handbüchern im Downloadbereich auf dieser Seite.
5
2 Bewertungen