S-Works Enduro 29/6Fattie Frame
$3,500.00
Nº de pieza:  

S-Works Enduro 29/6Fattie Frame

$3,500.00
Nº de pieza:  115436
load-spinner
S-Works Enduro 29/6Fattie Frame
Resumen de Compra
Especificaciones técnicas
Geometría
With our new S-Works Enduro, some people asked us, "Why mess with a good thing?" But where some would comfortably rest on their laurels, we aimed to keep evolving. And the result is the most fun you'll ever have on a mountain bike. Seriously. We gave it a whole new geometry, with a slacker front end, a longer top tube, short chainstays, and a lower bottom bracket. All of this together makes the bike truly feel glued to the ground, and the platform is more responsive and capable then ever. We even added some brand new bits, like integrated storage with a SWAT™ Door at the down tube, and made "old" new again by making a triumphant return to a threaded bottom bracket. To keep the weight down, the frame is constructed from our top-tier FACT IS-X 11m carbon fiber. And to ensure top-level performance on the descents, this material choice is greeted by 160mm of plush travel at both the front and rear. And handling suspension duties out back is the revolutionary Öhlins single tube rear shock.
  • The frame's FACT IS-X 11m carbon fiber construction stands as the pinnacle of lightweight, efficient, and tough trail performance. It's been built off our 29 Geometry, which also lends itself to running 6Fattie wheels and tires (only a 7mm BB drop), in order to provide an aggressive, well-rounded ride. And with internal Command Post IR routing, a return to a threaded bottom bracket, and an integrated SWAT™ Door at the down tube, you get a bike that's clean, dependable, and ready for anything that the trail has to offer.
  • The custom Öhlins STX single tube air shock at the rear features high- and low-speed compression, as well as low-speed rebound. You'll also find an extra-volume reservoir that allows for more oil, which results in more control and an ultra-plush ride quality.

Especificaciones técnicas

MARCO
ABRAZADERA Alloy, 36.6mm
CUADRO FACT 11m, X-Wing layout, full carbon chassis and rear end, All-Mountain Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, ManFu link, oversized pivot bearings, 12x148mm dropouts, replaceable derailleur hanger, 165mm of travel
Suspensión
SUSPENSION TRASERA Custom Öhlins STX, Single Tube design, Rx All-Mountain Tune, 3rd Chamber air spring technology, AUTOSAG, adjustable compression & rebound damping, 216x57mm

Geometría

Geometry Chart

Enduro - Geometría

S M L XL
  S M L XL
Seat Post Length 100mm 125mm 125mm 125mm
Alcance 410mm 430mm 450mm 470mm
Stack 609mm 609mm 622mm 636mm
B-B Height (29x2.3) 352mm 352mm 352mm 352mm
Distancia entre ejes 1159mm 1179mm 1205mm 1231mm
Bike Stand-Over Height 757mm 766mm 781mm 796mm
B-B Height (650x3.0) 345mm 345mm 345mm 345mm
B-B Height (650x2.8) 339mm 339mm 339mm 339mm
Largo de tubo de dirección 95mm 95mm 110mm 125mm
Front-Center 727mm 747mm 773mm 799mm
Fork Rake/Offset 51mm 51mm 51mm 51mm
Ángulo de tubo de dirección 66° 66° 66° 66°
Trail 107mm 107mm 107mm 107mm
Largo de vaina inferior 432mm 432mm 432mm 432mm
Fork Length (full) 569mm 569mm 569mm 569mm
Ángulo de tubo de asiento 76.5° 76° 76° 75°
Caída de caja pedalera 19mm 19mm 19mm 19mm
Seat-Tube Length 396mm 430mm 468mm 523mm
Top-Tube Length (horizontal) 555mm 575mm 600mm 625mm