Expedition Sport
Nº de pieza:  

Expedition Sport

Nº de pieza:  
The Expedition Sport adds another level of plushness to the ride with a suspension seatpost. You'll have a wider range of gearing with triple chainrings, leaving you free to explore a wider range of terrain.
  • Body Geometry Comfort closed-end grips for an ergonomic contact point to keep hands fatigue-free
  • A1 Premium Aluminum frame with Ground Control Geometry for stability and safety, plus 63mm-travel fork with alloy lowers for lightweight confidence on any surface, forged dropouts and integrated kickstand mount
  • Smooth-rolling Hemisphere 26" tires with flat protection and semi-connected tread pattern for traction and control on pavement or gravel
  • Comfort saddle uses springs, dual-density foam on top, and has a wide platform for ultimate comfort
  • Double-wall, alloy 32-hole rims are strong and smooth

Especificaciones técnicas

BOTTOM BRACKET Cartridge bearings, square spindle, capless bolts
CRANKSET SR Suntour NEX, 8-speed, square spindle, w/ chainguard
SHIFT LEVERS Shimano, 7-speed, Revo-shift
FRONT DERAILLEUR Shimano FD-TX50, top-swing, dual-pull
CASSETTE Shimano MegaRange, 7-speed, 14-34
CHAINRINGS 42/34/24, w/ chainguard
REAR DERAILLEUR Shimano Altus, 7-speed
FRONT HUB Double-sealed, ground race, dual-lock nuts w/ 17mm contact side, 5mm QR
REAR HUB Double-sealed, ground race, freewheel type, QR
INNER TUBES Standard Schrader valve
SPOKES Stainless, 14g (2.0mm)
RIMS Alloy double-wall, 32h
FRONT TIRE Specialized Hemisphere, 26x1.95"", wire bead, Flak Jacket protection, 26 TPI
REAR TIRE Specialized Hemisphere, 26x1.95"", wire bead, Flak Jacket protection, 26 TPI
SADDLE Comfort Plus, dual-density foam, springs
TAPE Specialized Body Geometry Comfort, dual compound
SEATPOST Alloy suspension, 2-bolt, 27.2mm
HANDLEBARS Specialized riser bar, alloy, 15-degree backsweep, 60mm rise, 25.4mm
STEM Adjustable quill, die-cast alloy, 2-bolt, 150mm x 25.4mm clamp
FRONT BRAKE Die-cast, alloy V-brake, 60mm 1pc. pad, linear pull
BRAKE LEVERS Alloy, four-finger, Kraton comfort lever
REAR BRAKE Die-cast, alloy V-brake, 60mm 1pc. pad, linear pull
PEDALS Comfort, composite body w/ rubber top, sealed loose ball bearings
HEADSET 1-1/8"" FSA Intelaset, threaded, Cr-Mo cups
FORK SR Suntour NEX Coil, aluminum lower, preload adj., 63mm travel
FRAME A1 Premium Aluminum, Ground Control Geometry, 26"" frame, formed tubes, forged dropouts w/ replaceable derailleur hanger


Geometry Chart

- Geometría

Largo de tubo de dirección 160mm 180mm 200mm 220mm
Largo de tubo superior, Horizontal 610mm 625mm 640mm 655mm
Front-Center 630mm 644mm 665mm 679mm
Ángulo de tubo de dirección 68.5° 68.5° 68.5° 68.5°
Altura de standover 691mm 736mm 781mm 824mm
Rake de horquilla 40mm 40mm 40mm 40mm
Trail 89mm 89mm 89mm 89mm
Largo de vaina inferior 500mm 500mm 500mm 500mm
Ángulo de tubo de asiento 67° 67° 67.5° 67.5°
Distancia entre ejes 1123mm 1138mm 1159mm 1173mm
Tubo de asiento, Centro de caja pedalera 370mm 425mm 480mm 535mm
Caída de caja pedalera 59mm 59mm 59mm 59mm