Enter your ZIP code so we can provide the most accurate inventory and delivery information.
Rockhopper 29
FRAME
Specialized M4 29"" fully manipulated alloy frame, fully butted, disc only, externally relieved HT, forged dropouts w/ replaceable derailleur hanger
HEADSET
Integrated 1-1/8"" threadless, Campy-style, full cartridge bearings
SEAT BINDER
34.9mm, forged alloy, extruded QR lever
FORK
SR Suntour XCR 29"" (SF11-XCR-DS-26-LO-SP), magnesium lower, 30mm steel stanchions, 1-1/8"" alloy steerer, hyd. damping w/ Specialized Spike Valve and alloy LO cartridge, 80mm travel
RIMS
Alex RH Disc 29"", alloy double-wall, 28mm, pin joint, 32h
FRONT HUB
Formula disc hub, high-low flange, double-sealed loose ball, machined disc mount, QR, 32h
REAR HUB
SBC alloy, mid flange, double-sealed, ground race, machined disc mount and flanges, cassette, QR, 32h
SPOKES
Stainless, 2.0mm (14g)
FRONT TIRE
Specialized The Captain Sport, 60 TPI, wire bead, 29x2.0""
REAR TIRE
Specialized The Captain Sport, 60 TPI, wire bead, 29x2.0""
INNER TUBES
Presta valve
FRONT DERAILLEUR
Shimano Acera, 9-speed, 34.9mm clamp, top-swing, dual-pull
REAR DERAILLEUR
Shimano Alivio, 9-speed, SGS cage
SHIFT LEVERS
Shimano Acera, 9-speed Rapidfire plus, SL type w/ optical display
CASSETTE
Shimano 9-speed, 11-34t
CHAIN
KMC X-9, 9-speed, reusable Missing Link
CRANKSET
SR Suntour, 9-speed, Octalink spline
CHAINRINGS
44/32/22, replaceable outer
BOTTOM BRACKET
Shimano, Octalink spline, cartridge bearing, 73mm
SEATPOST
Alloy, 2 bolt head, 30.9mm, 12.5mm offset, micro adjust
STEM
3D forged 6061 alloy, 4 bolt clamp, 7º rise, 31.8mm
HANDLEBARS
Flat bar, double butted alloy , 680mm (S) or 700mm (M, L, XL, XXL) wide,10º backsweep, 4º upsweep, 31.8mm
GRIPS
Specialized Body Geometry XCT Men's, dual compound, Kraton rubber, closed end, 130mm
SADDLE
Specialized Body Geometry Rockhopper, steel rails, 143mm width
FRONT BRAKE
Tektro Draco hydraulic disc brake, post mount, 180mm 6-bolt rotor
REAR BRAKE
Tektro Draco hydraulic disc brake, post mount, 160mm 6-bolt rotor
BRAKE LEVERS
Tektro Draco hydraulic
PEDALS
Composite plastic body, loose ball w/ reflectors
* Weights based on production painted frames as pictured. Actual weights will vary based on colorway, frame size, and component variation. Specifications are subject to change without notice.
15.5 | 17.5 | 19.0 | 21.0 | 23.0 | |
---|---|---|---|---|---|
Top Tube Length (Horizontal) | 576mm | 603mm | 625mm | 650mm | 670mm |
Seat Tube Angle (Effective) | 73° | 73° | 73° | 73° | 73° |
Top Tube Length (Actual) | 550mm | 572mm | 594mm | 621mm | 644mm |
Seat Tube Angle (Actual) | 73° | 72° | 72° | 72° | 73° |
Seat Tube Length, Center to Top | 394mm | 445mm | 483mm | 533mm | 584mm |
Bottom Bracket Drop | 63.5mm | 63.5mm | 63.5mm | 63.5mm | 63.5mm |
Bottom Bracket Height | 310mm | 310mm | 310mm | 310mm | 310mm |
Wheel Base | 1064mm | 1091mm | 1114mm | 1139mm | 1160mm |
Standover Height | 754mm | 789mm | 821mm | 853mm | 890mm |
Stack | 613mm | 623mm | 637mm | 651mm | 670mm |
Reach | 388mm | 412mm | 430mm | 451mm | 465mm |
Head Tube Length | 110mm | 120mm | 135mm | 150mm | 170mm |
Head Tube Angle | 71° | 71° | 71° | 71° | 71° |
Chainstay Length | 442mm | 442mm | 442mm | 442mm | 442mm |
Crank Length | 170mm | 175mm | 175mm | 175mm | 175mm |
Handlebar Width | 680mm | 700mm | 700mm | 700mm | 700mm |
Stem Length | 75mm | 75mm | 90mm | 90mm | 105mm |
Seatpost Length | 350mm | 350mm | 400mm | 400mm | 400mm |