Pitch Pro
Part No.  

Pitch Pro

Part No.  
Born from the same brains that brought you the Enduro SL, the Pitch™ levels even the most demanding All Mountain terrain with a tough M4 advanced alloy frame, 140mm of FSR suspension and a generous helping of top-shelf specs, including RockShox, FOX and Avid components.
  • Pitch disc-specific double-wall rims with eyelets provide the durability needed for All Mountain terrain
  • RockShox Pike 351 140mm-travel fork with lightweight alloy steerer features highly tunable Solo Air spring and Motion Control damping for perfectly dialed bump performance
  • Fox RP2 air spring shock features rebound adjust with settings for efficient ProPedal performance or fully open to best suit the terrain being covered
  • Truvativ GXP2 2.1 2-piece crankset with 24/36-tooth lightweight alloy rings and alloy bash guard for stiffness, durability and efficient climbing/descending
  • Avid Elixir 4 full hydraulic disc brakes with alloy backed organic pads and G2 Clean Sweep rotors for durable, balanced and controlled stopping power

Technical Specifications

CHAIN KMC HG 73 w/ reusable Missing Link
BOTTOM BRACKET Shimano outboard cartridge bearing design integrated w/ M532 2pc crank
CRANKSET Shimano M532, 2pc design, 9-speed, replaceable rings w/ alloy outer
FRONT DERAILLEUR Shimano M580 LX, E type
SHIFT LEVERS SRAM X-5, 9-speed trigger
CHAINRINGS 22S/32S/44A 4mm thick outer, 4 bolt 104/64mm
FORK Rockshox Pike 351 for Specialized, 140mm travel, coil U Turn, Motion Control damper, disc only, alloy steerer, rebound adjust, Maxle 360 included
REAR SHOCK Fox RP2, 2-position switch 1) ProPedal 2) full open, rebound adjust
FRONT HUB Specialized Stout disc, sealed cartridge bearing, 20mm thru axle, high/low flange
REAR HUB Shimano M475L, 32h, 9-speed cassette
SPOKES 1.8mm (15g) stainless, black, alloy nipples
FRONT TIRE Specialized Eskar Control, 26x2.3""
RIMS DT-Swiss 445D, 26"", double wall disc, pin joint, eyelets, 32h
REAR TIRE Specialized Eskar Control, 26x2.3""
SADDLE Specialized Enduro, 7mm hollow Cr-Mo rails, SL foam
STEM Specialized 3D forged alloy, 8 degree rise, 31.8mm 4 bolt clamp, S:60mm, M/L:75mm, XL:90mm
HANDLEBARS Specialized mid rise, butted, 31.8mm, 660mm wide, 8 degree up, 8 degree back sweep
FRONT BRAKE Avid Juicy 3 SL, hydraulic disc, G2 Clean Sweep 203mm rotor
REAR BRAKE Avid Juicy 3 SL, hydraulic disc, G2 Clean Sweep 180mm rotor
PEDALS Shimano 505 SPD, reflectors and cleats
HEADSET 1 1/8"" threadless, black steel cups, loose ball bearings w/ seals
SEAT BINDER Alloy collar w/ QR, 34.9mm clamp ID
FRAME M4 Pitch frame, M4 tubing, double ORE downtube, DMD front derailleur mount, sealed cartridge bearing pivots, replaceable hanger, bolt on cable guides, 150mm travel


Geometry Chart

- Geometry

Crank Length 170mm 175mm 175mm 175mm
Stem Length 60mm 75mm 75mm 90mm
Seatpost Length 350mm 350mm 400mm 400mm
Handlebar Width 660mm 660mm 660mm 660mm
Chainstay Length 421mm 421mm 421mm 421mm
Top Tube Length (Actual) 553mm 574mm 606mm 632mm
Top Tube Length (Horizontal) 565mm 586mm 620mm 645mm
Head Tube Angle - Low Setting 67° 67° 67° 67°
Standover Height 742mm 748mm 759mm 765mm
Head Tube Height 102mm 108mm 128mm 150mm
Seat Tube Angle (Actual) - Low Setting 71.9° 71.9° 71.9° 71.9°
Seat Tube Angle (Effective) - Low Setting 74° 74° 74° 74°
Seat Tube Length - Center to Top 421mm 444mm 483mm 533mm
Bottom Bracket Height - Low Setting 356mm 356mm 356mm 356mm