P.3 Pro
Part No.  

P.3 Pro

Part No.  
P.3 Pro
Technical Specifications
The P.Series P.3 Pro takes all of the P.3 hallmarks and elevates them with an incredible spec. So yes, you'll find a lightweight and bombproof A1 Premium Aluminum frame with our trademark geometry that's been proven at the street, park, and dirt, only now, you get pieces like a Manitou Circus Expert fork and our Stout DJ Pro cranks. If you're looking to go big, you've come to the right place.
  • The frame is constructed from A1 Premium Aluminum in order to keep the overall weight at a minimum, while also ensuring that the bike is plenty tough to take a hit. And when it comes to cool features that make the difference, you get forged horizontal dropouts and integrated chain tensioners to keep the rear wheel locked in place, ISCG 05 to run chainguides, and a tough, forged shell surrounding the BB30 bottom bracket.
  • Manitou Circus Expert features 100mm of air-sprung travel and stiff 32mm stanchions. You also get Manitou's acclaimed TPC rebound damper and a stiff, sturdy 15mm thru-axle.
  • The Stout DJ PRO crankset features an ultra-tough 30mm spindle, a nearly bulletproof construction, and a 30T chainring.

Technical Specifications

CHAIN KMC Z610H, single-speed, 1/2""x3/32""
BOTTOM BRACKET BB30, sealed cartridge bearings
CRANKSET Stout DJ PRO crankset, 30mm alloy spindle, 170mm
FORK Manitou Circus Expert, Air spring, Absolute+ w/ Jump Stack, TPC rebound damping, 32mm stanchions, 100mm travel, 15mm thru-axle
FRONT HUB Specialized disc, alloy, sealed cartridge bearings,15x100mm thru-axle, 32h
REAR HUB P. Series Dirt Jump, alloy disc hub, sealed cartridge bearings, single speed w/ 14t 3/32"" cog, 10mm Cr-Mo axle, 32h
INNER TUBES Standard, Schrader valve
SPOKES Stainless, 14g, black
RIMS P.26, alloy, double-wall, triple void, 32mm inner width, 32h
FRONT TIRE Renegade Slopestyle, 26x2.1"", 60TPI, wire bead
REAR TIRE Renegade Slopestyle, 26x2.1"", 60TPI, wire bead
SADDLE P.Series Dirt, steel rails
SEATPOST Specialized, 6061 alloy, 2-bolt clamp, 0mm setback, 30.9mm
STEM Forged Alloy, 31.8mm clamp, 40mm
HANDLEBARS Specialized P.Series MTB Dirt, 6061 alloy, 9-degree backsweep, 6-degree upsweep, 38mm rise, 750mm width, 31.8mm
GRIPS Specialized P.Grip, lock-on
FRONT BRAKE SRAM Level, hydraulic disc, 160mm rotor
REAR BRAKE SRAM Level, hydraulic disc, 160mm rotor
PEDALS Specialized Dirt Pedal, nylon body w/ molded pins, DU bushing
SEAT BINDER Alloy, single bolt, 34.9mm
FRAME Specialized A1 Premium Aluminum, fully-butted tubing, tapered head tube, BB30 forged BB shell, integrated ISCG 05 tabs, forged horizontal dropouts, integrated chain tensioners


Geometry Chart

P. Series - Geometry

  22.5" TT
Crank Length 170mm
Stem Length 40mm
Seatpost Length 200mm
Handlebar Width 750mm
Reach 413mm
Stack 546mm
Wheelbase 1029mm
Bike Stand-Over Height 338mm
Head-Tube Length 128mm
Front-Center 646mm
Fork Rake/Offset 40mm
Head-Tube Angle 70.5°
Trail 77mm
Chain-Stay Length 383mm
B-B Height 331mm
Seat-Tube Angle 74°
Fork Length (full) 457mm
B-B Drop 7mm
Seat-Tube Length 304mm
Top-Tube Length (horizontal) 570mm