Part No.  


Part No.  
Technical Specifications
Marzocchi DJ2 fork smooths out the P.2 landing, while its double-butted Cr-Mo Reynolds steel frame can withstand the unplanned dismounts.
  • Superlight and durable one-piece saddle/post combo can take a serious beating
  • 36-spoke, double-walled and eyeletted 26" alloy rims are built to withstand endless abuse
  • Avid BB5 mechanical disc brake with 140mm G2 Clean Sweep rotor for smooth stopping power you can modulate when you need it
  • Lightweight plastic platform pedals take mercy on your shins, but remain strong enough to handle even the harshest landing
  • Pavement, concrete or dirt, Specialized Rhythm Lite Control tires w/ Aramid bead are fast-rolling and durable, with ample bite for your dirt sessions
  • 80mm-travel Marzocchi DJ2 fork features hydraulic damping and rebound/preload adjust with a "stiff" coil spring to take the edge off those larger hits
  • BMX style, 2-piece tubular Cr-Mo crankset is strong and light to boost with confidence, singlespeed 25t chainring resists bending and delivers the clearance you need
  • Butted singlespeed-specific Reynolds 520 Cr-Mo frame with integrated head tube, MID BB, and 3D-forged horizontal dropouts with integrated chain tensioner has perfectly dialed geos for dirt, park, or street

Technical Specifications

CHAIN KMC Z510HX, 1/2"" x 1/8"", anti-drop inner links
BOTTOM BRACKET Mid BB, 2x sealed cartridge bearing w/ 19mm spindle, alloy tube and cone spacers
CRANKSET P. 2pc Tubulars, heat treated Cr-Mo for 8 spline, 175mm length
CASSETTE Cr-Mo 1/2x1/8x12t cog
CHAINRINGS CNC cut 6061, 25t, Motostar design
FORK Marzocchi DJ2, 80mm, 32mm stanchions, magnesium lower, cold forged crown, hydraulic damping w/ rebound adj, coil spring w/ air preload adj.
SADDLE P. Combo, 1pc co-molded composite saddle and alloy seat post combination
SEATPOST Alloy, no offset, 25.4mm
STEM SBC Aggro Stem, 3D forged/CNC, 4-bolt, 35mm length
HANDLEBARS Butted 31.8mm alloy riserbar, 60mm rise, 8 degree back sweep, 6 degree up
GRIPS P. Grip, flanged soft compound, closed end, 150mm
FRONT HUB P. Low flange, forged alloy, 3/8"" bolt on axle, cartridge bearings, 36h
REAR HUB P. Disc Cassette, Forged alloy single speed cassette, machined flanges and disc mount, 3/8"" bolt on axle, cartridge bearings, 36h
INNER TUBES Schraeder valve
SPOKES 2mm (14g) stainless
RIMS P. Disc 26"", alloy double wall, pinned w/ eyelets, 36h
FRONT TIRE Specialized Rhythm Lite Control, 26 x 2.3"", 60TPI, aramid bead
REAR TIRE Specialized Rhythm Lite Control, 26 x 2.3"", 60TPI, aramid bead
BRAKE LEVERS Avid FR-5, alloy, two-finger, linear pull
REAR BRAKE Avid BB5, mechanical disc, 140mm G2 Clean Sweep rotor
PEDALS SBC Lo Pro plastic platform, loose ball, 9/16""
HEADSET Integrated FSA Impact, 1-1/8"" threadless, Campy type cartridge bearings
SEAT BINDER Integrated w/ replaceable single bolt
FRAME P. Series Reynolds 520 Cr-Mo, double-butted TT/DT, SS-specific dirt/park/strett geo, externally relieved HT, horizontal drop out w/ disc mount, integrated tensioner & hardware, disc only


Geometry Chart

- Geometry

Reach 382mm
Stack 555mm
Chainstay Length 390mm
Top Tube Length (Actual) 573mm
Ground-Top 872mm
Top Tube Length (Horizontal) 600mm
Head Tube Angle - Low Setting 69.5°
Standover Height 712mm
Head Tube Height 128mm
Wheel Base 1049mm
Seat Tube Angle (Actual) - Low Setting 69°
Seat Tube Angle (Effective) - Low Setting 71°
Seat Tube Length - Center to Top 332mm
Bottom Bracket Height - Low Setting 317mm