Men's S-Works Camber 29
Part No.  

Men's S-Works Camber 29

Part No.  129204
load-spinner
Men's S-Works Camber 29
Overview
Technical Specifications
Geometry

The S-Works Camber 29 represents a new way of thinking about trail bikes, giving the handling and cushion required for challenging trails without compromising on near XC climbing ability. Think of it as a "do-anything" trail bike that's fully equipped with SWAT™ storage and a superlative build kit.

The concept behind the Camber 29 is pretty simple—if speed is your thing, it's the only trail bike you're ever going to need. Essentially, it blends all of the trail bike characteristics that you want with the XC climbing prowess that you need. This is achieved by thoughtfully combining our full FACT 11m carbon fiber Trail Chassis with a carbon Camber FSR rear end.

At both ends of the bike, you'll find 120 millimeters of travel that deliver plenty of plush suspension—all without going overboard on big hit capability. This means that you don't have to sacrifice efficiency, weight, or sheer speed to ride how you want. And with our Trail 29 Geometry and lightweight, stiff, and smooth Concentric Pivot at the rear, we can guarantee it.

The other trail component of the Camber is utility, and along these lines, it features our fully integrated SWAT™ Door at the down tube of the frame. Open it up, and you're able to safely and securely house your ride essentials right where you want them—on the bike.

For the build, we selected components like the superlative 12-speed SRAM XX1 Eagle and SRAM Level Ultimate brakes that hold nothing back in delivering unadulterated, supreme performance. Add it all up, and you get one bike that can quite literally do it all.

  • A FACT 11m carbon fiber Trail Chassis w/ Camber FSR rear end is stiff, responsive, and remarkably efficient, making the Camber well suited to climbing and descending over technical terrain. You'll also find internal cable routing for clean lines and minimal maintenance, plus an integrated SWAT™ Door at the down tube for zero-hassle storage of your trail essentials.
  • FOX 34 Factory 29 fork features 34mm aluminum stanchions that are equal parts strong and stiff, 120mm of plush, trail taming travel, and three-position lever adjust that lets you customize the suspension on-the-fly for any trail condition.
  • The XX1 Eagle rear derailleur is the pinnacle of shifting performance, floating through the 12-speed cassette with crisp, precise shifts.

Technical Specifications

DRIVETRAIN
CHAIN SRAM XX1 Eagle, 12-speed w/ PowerLock®
BOTTOM BRACKET SRAM PF30
CRANKSET SRAM XX1 Eagle, 175/170mm crankarm, 30mm spindle
SHIFT LEVERS SRAM XX1 Eagle, trigger, 12-speed
CASSETTE SRAM X01 Eagle, 12-speed, 10-50t
CHAINRINGS Alloy, 30T
REAR DERAILLEUR SRAM XX1 Eagle™, 12-speed
SUSPENSION
FORK FOX 34 Factory 29, Kashima coating, 3-position adjust, compression and rebound adjust, 51mm offset, 15x100mm thru-axle, 120mm travel
REAR SHOCK FOX FLOAT Factory, Rx Trail Tune, AUTOSAG, DPS damper, Kashima coating, rebound and 3-position compression adjust, 205x53mm
WHEELS
FRONT HUB Specialized, sealed cartridge bearings, 15x100mm spacing, 24h
REAR HUB Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 142mm spacing, 28h
INNER TUBES Standard, Presta valve
SPOKES DT Swiss Revolution
RIMS Roval Traverse SL 29, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built
FRONT TIRE Purgatory, GRIPTON compound, 2Bliss Ready, 29 x 2.3""
REAR TIRE Ground Control, Gripton compound, 2Bliss Ready, 29 x 2.3""
COCKPIT
SADDLE Body Geometry Henge Expert, hollow Ti rails, 143mm
SEATPOST Command Post IRcc, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote SRL lever, 30.9mm, S: 100mm, M/L/XL: 125mm of travel
STEM Syntace F109, 6-degree rise, 31.8mm clamp
HANDLEBARS Specialized Trail, FACT carbon, 6-degree upsweep, 8-degree backsweep, 27mm rise, 750mm, 31.8mm
GRIPS Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness
BRAKES
FRONT BRAKE SRAM Level Ultimate disc lever/caliper, organic pads, 200/180mm rotors
REAR BRAKE SRAM Level Ultimate disc lever/caliper, organic pads, 200/180mm rotors
ACCESSORIES
PEDALS Specialized Platform, Cr-Mo, 9/16"" spindle
FRAMESET
SEAT BINDER Alloy, 34.9mm
FRAME S-Works FACT 11m, full carbon chassis and rear end, Trail Geometry, SWAT™ Door integration, PF30 BB, fully enclosed internal cable routing, Concentric Pivot link, 12x142mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 120mm of travel

Geometry

Geometry Chart

Camber - Geometry

S M L XL
  S M L XL
Crank Length 170mm 175mm 175mm 175mm
Stem Length 60mm 60mm 75mm 90mm
Seatpost Length 390mm 430mm 430mm 430mm
Saddle Width 143mm 143mm 143mm 143mm
Handlebar Width 750mm 750mm 750mm 750mm
Reach 399mm 427mm 445mm 471mm
Top Tube Length, Horizontal 562mm 590mm 613mm 647mm
Stack 609mm 609mm 627mm 655mm
Wheelbase 1107mm 1135mm 1160mm 1197mm
Chainstay Length 437mm 437mm 437mm 437mm
Front Center 673mm 701mm 726mm 763mm
BB Drop 42mm 42mm 42mm 42mm
BB Height 330mm 330mm 330mm 330mm
Seat Tube Angle 75° 75° 75° 75°
Head Tube Angle 68.5° 68.5° 68.5° 68.5°
Seat Tube Length 396mm 430mm 468mm 523mm
Head Tube Length 95mm 95mm 115mm 145mm
Bike Standover Height 732mm 735mm 752mm 766mm
Fork Rake/Offset 46mm 46mm 46mm 46mm
Fork Length, Full 531mm 531mm 531mm 531mm
Trail 97mm 97mm 97mm 97mm