Enter your ZIP code so we can provide the most accurate inventory and delivery information.
Stumpjumper Pro 29/6Fattie
Why should S-Works have all the fun? With our Stumpjumper Pro 29/6Fattie, you get many of the same performance features, like Öhlins front and rear suspension, so you can climb and descend with the best of them at the break-neck speed 29ers are known the world over for.
Starting at the carbon layup, it features our highest-end FACT 11m for an ultra-lightweight, strong, and stiff construction. The carbon molding process also allowed us to revolutionize how you carry your trail essentials with the all-new SWAT™ Door found at the down tube. This compartment will fit a tube, a tool, and pump without rattling or compromising the structural integrity of the frame. Further improving the ride, you'll also find an aggressive, trail-eating geometry that features ridiculously short chainstays, a roomy top tube, a low bottom bracket, a slacked out front end, and our proprietary Rx Trail Tune at the shock. And to make things even better, the Stumpy's design also allows you the opportunity to toggle between 29-inch wheels and 6Fattie wheels (not included), allowing the ultimate in configuration options for the trail at hand.
And for this model, we outfitted the Pro with a high-performing build spec that features a SRAM X01 Eagle drivetrain, SRAM Guide RS brakes, Öhlins front and rear suspension, and hand-built Roval Traverse carbon wheels, so you get a bike that, without a doubt, is ready for anything on the trail.
FRAME
S-Works FACT 11m, full carbon chassis and rear end, 29/6Fattie Trail Geometry, SWAT™ Door integration, PF30 BB, fully enclosed internal cable routing, ManFu link, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 135mm of travel
SEAT BINDER
Alloy, 34.9mm
RIMS
Roval Traverse Carbon 29, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built
FRONT TIRE
Butcher, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"
REAR TIRE
Purgatory, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"
SPOKES
DT Swiss Revolution
FRONT HUB
Specialized, sealed cartridge bearings, 15x110mm spacing, 24h
REAR HUB
DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
INNER TUBES
Standard, Presta valve
REAR SHOCK
Custom Öhlins STX, Single-Tube design, Rx Trail Tune, 3rd Chamber air spring technology, AUTOSAG, adjustable compression & rebound damping, 197x48mm
FORK
Öhlins RXF 36, 29/6Fattie, Single-Tube design, air spring w/ adjustable 3rd chamber, adjustable low speed compression, adjustable rebound, 15x110mm thru-axle, 51mm offset, 150mm of travel
CHAIN
SRAM X01 Eagle, 12-speed w/ PowerLock
CASSETTE
SRAM X01 Eagle, 12-speed, 10-50t
REAR DERAILLEUR
SRAM X01 Eagle, 12-speed
SHIFT LEVERS
SRAM X01 Eagle, trigger, 12-speed
BOTTOM BRACKET
SRAM PF30
CHAINRINGS
30T
CRANKSET
Truvativ Descendant, carbon, Boost™ 148, 170mm crankarm, 30mm spindle
HANDLEBARS
Specialized Trail, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 780mm, 31.8mm clamp
STEM
Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise
SEATPOST
Command Post IRcc, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote SRL lever, 30.9mm, S: 100mm, M/L/XL: 125mm of travel
SADDLE
Body Geometry Henge Expert, hollow Ti rails, 143mm
GRIPS
Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness
REAR BRAKE
SRAM Guide RS, hydraulic disc, organic pads, Guide S4 4-piston caliper, 180/160mm rotor
FRONT BRAKE
SRAM Guide RS, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200/180mm rotor
PEDALS
Specialized Platform, Cr-Mo, 9/16" spindle
* Weights based on production painted frames as pictured. Actual weights will vary based on colorway, frame size, and component variation. Specifications are subject to change without notice.
S | M | L | XL | |
---|---|---|---|---|
Crank Length | 170MM | 170MM | 170MM | 170MM |
Handlebar Width | 780mm | 780mm | 780mm | 780mm |
Stem Length | 45MM | 60MM | 60MM | 60MM |
Saddle Width | 143mm | 143mm | 143mm | 143mm |
Seatpost Length | 390mm | 430mm | 430mm | 430mm |
BB Height, 29x2.3" | 338mm | 338mm | 338mm | 338mm |
Stack | 618mm | 618mm | 646mm | 664mm |
Reach | 386mm | 413mm | 431mm | 457mm |
Head Tube Length | 125mm | 145mm | 95mm | 95mm |
Head Tube Angle | 67° | 67° | 67° | 67° |
BB Drop | 33mm | 33mm | 33mm | 33mm |
Trail | 96.5mm | 96.5mm | 96.5mm | 96.5mm |
Fork Length, Full | 560mm | 560mm | 560mm | 560mm |
Fork Rake/Offset | 51mm | 51mm | 51mm | 51mm |
Front Center | 687mm | 714mm | 744mm | 777mm |
Chainstay Length | 437mm | 437mm | 437mm | 437mm |
Wheelbase | 1122mm | 1149mm | 1179mm | 1212mm |
Top Tube Length, Horizontal | 563mm | 590mm | 616mm | 648mm |
Bike Standover Height | 754mm | 761mm | 770mm | 777mm |
Seat Tube Length | 396mm | 430mm | 468mm | 523mm |
Seat Tube Angle | 74° | 74° | 74° | 74° |