Stumpjumper Comp

Nous livrons ! Dites simplement quand et comment.

Unübertroffene Fahrwerk-Kinematik, außergewöhnliches Handling, perfekt abgestimmte Steifigkeit - das Stumpjumper Comp hat alles im Überfluss. Mit einem wertigen Vollcarbon-Rahmen, der durch einen unkomplizierten Aufbau abgerundet wird, hast du das ultimative Trailbike.

Spécifications techniques

Rahmenset

RAHMEN

FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, flip chip Head Tube/Bottom Bracket adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 130mm of travel

SATTELSTÜTZKLEMME

Alloy, 38.6mm

Fahrwerk

DÄMPFER

FOX FLOAT DPS Performance, Rx Trail Tune, rebound and 3-position compression adjust, 190x45mm

GABEL

FOX FLOAT 34 Rhythm, GRIP damper, two position Sweep adjustment, 15x110mm axle, 44mm offset, 140mm of travel

Cockpit

VORBAU

Alloy Trail Stem, 35mm bar bore

LENKER

Specialized, 6061 alloy, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm width

LENKERBAND

Specialized Trail Grips

SATTEL

Bridge Comp, Hollow Cr-mo rails, 155/143mm

SATTELSTÜTZE

X-Fusion Manic, infinite adjustable, two-bolt head, bottom mount cable routing, remote SLR LE lever, 34.9, S1: 100mm, S2: 125mm, S3: 150mm, S4/S5: 175mm, S6: 190mm

Bremsen

BREMSE VORNE

Shimano SLX M7120, 4-piston caliper, hydraulic disc, 200mm

BREMSE HINTEN

Shimano SLX M7120, 4-piston caliper, hydraulic disc, 180mm

Antrieb

SCHALTWERK

Shimano SLX M7100, SGS, 12-speed

SCHALTHEBEL

Shimano SLX, M7100, 12spd

KASSETTE

Shimano SLX, CS-M7100, 12-speed, 10-51t

KETTE

Shimano SLX, M7100, 12-speed

KURBELGARNITUR

Shimano SLX, S1:165mm, S2-S5: 170mm, S6: 175mm

KETTENBLÄTTER

30T

INNENLAGER

Shimano, BB-MT800, Threaded

Laufräder

FELGEN

Specialized 29, hookless alloy, 30mm inner width, tubeless ready

VORDERRADNABE

Shimano MT400-B, Centerlock 28h, 15x110 Boost

HINTERRADNABE

Shimano MT510-B, Centerlock 28h, 12x148 Boost, Microspline

SPEICHEN

DT Swiss Industry

VORDERREIFEN

Butcher, GRID casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3"

HINTERREIFEN

Purgatory, GRID casing, GRIPTON® T7 compound, 29x2.3"

SCHLÄUCHE

Standard, Presta Valve

* Poids basés sur les cadres peints en production comme illustré. Les poids réels varieront en fonction de la couleur, de la taille du cadre et de la variation des composants. Les spécifications sont sujettes à modification sans préavis.

Géométries

	S1	S2	S3	S4	S5	S6
Stack (Low)	614mm	613mm	622mm	632mm	641mm	650mm
Stack (High)	610mm	609mm	618mm	627mm	636mm	646mm
Reach (Low)	410mm	430mm	450mm	475mm	500mm	530mm
Reach (High)	415mm	435mm	455mm	480mm	505mm	535mm
Steuerrohrlänge	95mm	100mm	110mm	120mm	130mm	140mm
Steuerrohrwinkel (Low)	65°	65°	65°	65°	65°	65°
Steuerrohrwinkel (High)	65.5°	65.5°	65.5°	65.5°	65.5°	65.5°
Tretlagerhöhe (Low)	328mm	333mm	333mm	333mm	333mm	333mm
Tretlagerhöhe (High)	335mm	340mm	340mm	340mm	340mm	340mm
Tretlagerabsenkung (Low)	47mm	42mm	42mm	42mm	42mm	42mm
Tretlagerabsenkung (High)	40mm	35mm	35mm	35mm	35mm	35mm
Nachlauf (Low)	126mm	126mm	126mm	126mm	126mm	126mm
Nachlauf (High)	123mm	123mm	123mm	123mm	123mm	123mm
Gabellänge (komplett)	550mm	550mm	550mm	550mm	550mm	550mm
Gabelversatz / Offset	44mm	44mm	44mm	44mm	44mm	44mm
Mitte Tretlager - Mitte V.-Achse	724mm	746mm	770mm	800mm	829mm	863mm
Kettenstreben-Länge	432mm	432mm	432mm	432mm	442mm	442mm
Radstand	1152mm	1175mm	1200mm	1228mm	1268mm	1302mm
Oberrohrlänge (horizontal)	563mm	583mm	605mm	632mm	660mm	692mm
Überstandshöhe	730mm	734mm	744mm	749mm	757mm	757mm
Sitzrohrlänge	385mm	385mm	405mm	425mm	445mm	465mm
Sitzrohrwinkel (Low)	76°	76°	76°	76°	76°	76°
Sitzrohrwinkel (High)	76.5°	76.5°	76.5°	76.5°	76.5°	76.5°
Einschub Sattelstütze maximal	220mm	220mm	240mm	260mm	280mm	300mm
Einschub Sattelstütze minimal	80mm	80mm	80mm	80mm	80mm	80mm