SX Trail Frame

2011 SX Trail Frame

Many gravity riders have their own particular menu of parts they like to hang from their most prized possession. Start with the SX Trail frame, and spec your bike right down to the spokes.

Technical Specifications

FRAMESET

FRAME

M5 manipulated ally, ORE TT/DT, tapered and forged HT, ISCG mount, 142mm dropouts, full cartridge bearing pivots and shock yoke, replaceable derailleur hanger, derailleur guard, 180mm travel

SEAT BINDER

34.9mm clamp ID, 7050 hard annodized alloy collar w/ QR, black

SUSPENSION

REAR SHOCK

Fox DHX RC4, coil over w/piggy back, rebound and High/Low speed compression and bottom-out control adj., 8.5x2.5"", S:450, M:500, L:550

COCKPIT

SEATPOST

Thomson straight w/ 12 degree clamp, 367mm

* Weights based on production painted frames as pictured. Actual weights will vary based on colourway, frame size, and component variation. Specifications are subject to change without notice.

Geometry

	S	M	L
Ground-Top	950mm	950mm	950mm
Bottom Bracket Height - Low Setting	356mm	356mm	356mm
Top Tube Length (Horizontal)	576mm	594mm	617mm
Head Tube Height	112mm	112mm	112mm
Head Tube Angle - Low Setting	65.5°	65.5°	65.5°
Seat Tube Angle (Actual) - Low Setting	70.5°	70.5°	70.5°
Seat Tube Angle (Effective) - Low Setting	74.5°	74.5°	74.5°
Top Tube Length (Actual)	543mm	556mm	575mm
Seat Tube Length - Center to Top	394mm	419mm	458mm
Wheel Base	1159mm	1177mm	1200mm
Standover Height	731mm	734mm	740mm
Stack	594mm	594mm	594mm
Reach	412mm	429mm	453mm
Chainstay Length	419mm	419mm	419mm
Crank Length	170mm	170mm	170mm
Handlebar Width	750mm	750mm	750mm
Stem Length	40mm	40mm	40mm
Seatpost Length	300mm	300mm	300mm