S-Works Stumpjumper EVO Frameset

The S-Works Stumpjumper EVO is much more than just a trail bike

Technical Specifications

Frameset

Frame

FACT 11m carbon chassis and rear-end, asymmetrical design, 29/27.5 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel

Seat Binder

Alloy, 38.6mm

Suspension

Rear Shock

FOX FLOAT X2 Factory, Rx Trail Tune, 2-position open/firm lever, HSC, LSC, HSR, and LSR adjustment, S1:210x50mm, S2-S6:210x55mm

Weight

3.32kg (7 lb, 5.1 oz)

Weight Size

* Weights based on production painted frames as pictured. Actual weights will vary based on colourway, frame size, and component variation. Specifications are subject to change without notice.

Geometry

	S1	S2	S3	S4	S5	S6
Seatpost Length	0mm
Headtube Angle	64.5°	64.5°	64.5°	64.5°	64.5°	64.5°
Front Center	732mm	756mm	780mm	809mm	838mm	873mm
Reach	408mm	428mm	448mm	475mm	498mm	528mm
BB Height	335mm	340mm	340mm	340mm	340mm	340mm
Chainstay Length	436mm	436mm	436mm	436mm	446mm	446mm
Trail	131mm	131mm	131mm	131mm	131mm	131mm
Wheelbase	1165mm	1189mm	1214mm	1245mm	1283mm	1317mm
BB Drop	40mm	35mm	35mm	35mm	35mm	35mm
Bike Standover Height	733mm	764mm	763mm	762mm	767mm	770mm
Seat Tube Angle	78°	77.6°	77.2°	76.9°	77°	77°
Fork Rake/Offset	44mm	44mm	44mm	44mm	44mm	44mm
Top-tube Length (horizontal)	538mm	564mm	590mm	623mm	647mm	679mm
Max Seatpost Insertion	180mm	180mm	200mm	220mm	240mm	260mm
Min Seatpost Insertion	80mm	80mm	80mm	80mm	80mm	80mm
Headtube Length	95mm	95mm	105mm	115mm	125mm	135mm
Fork Length (full)	561mm	571mm	571mm	571mm	571mm	571mm
Stack	613mm	617mm	626mm	635mm	644mm	654mm
Seat Tube Length	385mm	385mm	405mm	425mm	445mm	465mm