Enter your ZIP code so we can provide the most accurate inventory and delivery information.
Rockhopper Comp Int
FRAME
Specialized M4SL fully manipulated alloy frame, fully butted, integrated HT, forged dropouts w/ replaceable derailleur hanger, disc only
HEADSET
Integrated 1-1/8"" threadless, Campy type full cartridge bearings
SEAT BINDER
Forged alloy QR, brass washer
FORK
RockShox Recon Silver SL, magnesium lower, 1 1/8"" alloy steerer, 32mm Cr-Mo stanchions, coil spring w/ preload, external rebound adj. & LO
RIMS
DT-Swiss 445, 26"", alloy double wall disc, pinned w/ eyelets
FRONT TIRE
Specialized The Captain Control, 26x2.0"", 60TPI, tubeless ready aramid bead
SPOKES
2mm (14g) stainless
REAR HUB
Forged alloy, mid flange, double sealed, ground race, machined disc mount and flanges, cassette, QR, 32h
FRONT HUB
Forged alloy, hi/low flange, double sealed, ground race, machined disc mount and flange, QR, 28h
INNER TUBES
Presta valve
REAR TIRE
Specialized The Captain Control, 26x2.0"", 60TPI, tubeless ready aramid bead
SHIFT LEVERS
Shimano SL-M590 Deore trigger
REAR DERAILLEUR
Shimano SLX 9sp Shadow Long cage
FRONT DERAILLEUR
Shimano Deore, 34.9mm clamp, top swing, dual pull
CHAINRINGS
44A x 32S x 22S replaceable
CRANKSET
Shimano FC-M521, Hollowtech, Octalink spline
CASSETTE
Shimano HG50, 9-speed, 11-34t
CHAIN
KMC X9L w/ reuseable Missing Link
BOTTOM BRACKET
Shimano BB-ES25, Octalink spline, cartridge bearing, 68mm x 118mm
HANDLEBARS
Butted alloy riserbar, 25mm rise, 8 degree back sweep, 6 degree up
GRIPS
Specialized Enduro, dual compound Kraton, no flange, 131mm
STEM
3D forged alloy, 7 degree rise, 31.8mm clamp
SEATPOST
Alloy two bolt, 12.5mm offset, micro adjust, 30.9mm
SADDLE
Specialized Rockhopper XC, Body Geometry, 143mm width, front and rear bumpers
FRONT BRAKE
Avid Juicy 3 SL hydraulic disc, alloy backed pads, 160mm G2 Clean Sweep Rotor
REAR BRAKE
Avid Juicy 3 SL hydraulic disc, alloy backed pads, 160mm G2 Clean Sweep Rotor
BRAKE LEVERS
Avid Juicy 3 SL hydraulic
PEDALS
Alloy 1pc. body and cage, reflector kit, 9/16""
* Weights based on production painted frames as pictured. Actual weights will vary based on colourway, frame size, and component variation. Specifications are subject to change without notice.
13 | 15.5 | 17.5 | 19 | 21 | 23 | |
---|---|---|---|---|---|---|
Ground-Top | 869mm | 869mm | 898mm | 907mm | 926mm | 945mm |
Bottom Bracket Height - Low Setting | 304mm | 304mm | 304mm | 304mm | 304mm | 304mm |
Top Tube Length (Horizontal) | 545mm | 571mm | 596mm | 615mm | 640mm | 660mm |
Head Tube Height | 120mm | 120mm | 130mm | 140mm | 160mm | 180mm |
Head Tube Angle - Low Setting | 70° | 70° | 70° | 70° | 70° | 70° |
Seat Tube Angle (Actual) - Low Setting | 73° | 73° | 73° | 73° | 73° | 73° |
Top Tube Length (Actual) | 541.02mm | 552mm | 574mm | 589.91mm | 615.22mm | 638.08mm |
Seat Tube Length - Center to Top | 330mm | 394mm | 444mm | 483mm | 533mm | 584mm |
Wheel Base | 1030mm | 1050mm | 1076mm | 1102mm | 1128mm | 1149mm |
Standover Height | 698mm | 742mm | 784mm | 806mm | 842mm | 878mm |
Stack | 561mm | 560mm | 589mm | 599mm | 618mm | 637mm |
Reach | 373mm | 340mm | 416mm | 432mm | 451mm | 465mm |
Chainstay Length | 426mm | 426mm | 426mm | 426mm | 426mm | 426mm |