Rockhopper Comp 29

2015 Rockhopper Comp 29

The Rockhopper is a trail-ready machine equipped with Tektro Auriga hydraulic disc brakes, 29-inch wheels, and custom 2X9 drivetrain, allowing you to ride deep into your favourite trails with confidence.

Technical Specifications

FRAMESET

FRAME

Specialized A1 SL Aluminium, Trail 29 Geometry, fully-butted tube sets, ORE down tube, tapered head tube, forged dropouts, disc mount, replaceable derailleur hanger

HEADSET

1-1/8" upper, 1-1/2" lower, Campy style, integrated sealed cartridge bearings

SEAT BINDER

Alloy, nylon/glass Fibre washer, QR, 34.9mm

WHEELS

FRONT HUB

Specialized Stout XC, Hi Lo disc, alloy, RCC bearing system, QR, 28h

RIMS

Stout XC, 29" disc, alloy double-wall, pin joint, 26mm inner width, 28/32h

FRONT TYRE

Specialized Ground Control Sport, 60TPI, wire bead, 29x2.1"

SPOKES

Stainless, 14g, black

REAR HUB

Specialized Stout XC, Hi Lo disc, alloy, RCC bearing system, QR, 32h

INNER TUBES

Standard, Presta valve

REAR TYRE

Specialized Ground Control Sport, 60TPI, wire bead, 29x2.1"

SUSPENSION

FORK

Custom SR Suntour XCR-32 29, custom Multi-Circuit Damping, coil/MCU spring, S: 80mm travel, M/L/XL: 100mm travel, hydraulic lockout, preload adjust, mag lowers, Hi-Ten 32mm stanchions, tapered steerer, disc mount

DRIVETRAIN

REAR DERAILLEUR

Shimano Alivio Shadow, 9-speed, SGS cage

FRONT DERAILLEUR

SRAM X5, 2x10, high mount

SHIFT LEVERS

Shimano Acera Rapidfire Plus, 2x9, w/ optical display

CASSETTE

Sunrace, 9-speed, 11-36t

CRANKSET

Stout, forged alloy, 2x9, square taper spindle, anti-corrosion hardware

BOTTOM BRACKET

Square taper, cartridge bearings

CHAIN

KMC X10, 10-speed, w/ reusable MissingLink

COCKPIT

STEM

Specialized, 3D forged alloy, 4-bolt, 6-degree rise

SEATPOST

Alloy, 2-bolt, micro-adjust, 12.5mm offset, 30.9mm, anti-corrosion hardware

SADDLE

Body Geometry mountain, steel rails, 143mm

GRIPS

Specialized Body Geometry XCT, Kraton w/ gel, lock-on, closed end, 132mm

HANDLEBARS

Specialized Stout XC, flat bar, double-butted 6061 alloy, 9-degree backsweep, 4-degree upsweep, 31.8mm

ACCESSORIES

PEDALS

Composite platform, w/ reflectors, 9/16"

BRAKES

BRAKE LEVERS

Tektro Auriga, hydraulic, reach adjust

REAR BRAKE

Tektro Auriga, hydraulic disc, resin/metallic pads

FRONT BRAKE

Tektro Auriga, hydraulic disc, resin/metallic pads

* Weights based on production painted frames as pictured. Actual weights will vary based on colourway, frame size, and component variation. Specifications are subject to change without notice.

Geometry

	S	M	L	XL	XXL
Head-Tube Length	110mm	100mm	115mm	130mm	150mm
Seat-Post Length	350mm	350mm	400mm	400mm	400mm
Head-Tube Angle	71°	71°	71°	71°	71°
Chain-Stay Length	442mm	442mm	442mm	442mm	442mm
Top-Tube Length, Horizontal	588mm	615mm	637mm	662mm	682mm
Front-Center	642mm	657mm	680mm	704mm	725mm
Handle-Bar Width	720mm	720mm	720mm	720mm	720mm
Seat-Tube Length, B-B Center to Top	395mm	445mm	460mm	510mm	560mm
B-B Drop	63.5mm	63.5mm	63.5mm	63.5mm	63.5mm
B-B Height	308.5mm	308.5mm	308.5mm	308.5mm	308.5mm
Seat-Tube Angle (Effective)	73°	72°	72°	72°	72°
Seat-Tube Angle (Actual)	74.25°	73°	73°	73°	73°
Bike Stand-Over Height	757mm	808mm	824mm	856mm	888mm
Stack	615mm	624mm	639mm	653mm	672mm
Reach	400mm	412mm	430mm	450mm	464mm
Trail	79mm	79mm	79mm	79mm	79mm
Wheelbase	1076mm	1091mm	1114mm	1139mm	1159mm
Crank Length	170mm	175mm	175mm	175mm	175mm
Stem Length	60mm	70mm	70mm	80mm	90mm