BigHit III

2011 BigHit III

RockShox Domain Dual Crown RC fork and Fox Van RC coil-over shock smooth out the not-so-smooth landings and soak up the big hits.

Technical Specifications

FRAMESET

FRAME

M4 tubing ORE TT/DT, tapered HT, ISCG mount, asymetrical rear triangle, full cartridge bearing pivots , 7.5"" travel

HEADSET

1-1/8"" loose cage upper bearing and 1.5"" alloy lower semi-integrated cartridge bearing

SEAT BINDER

34.9mm clamp ID, alloy collar w/ QR, black

WHEELS

RIMS

Custom DT Swiss F550, 30mm wide, 32h

FRONT HUB

Specialized Hi Lo disc, laser-etched logo, sealed cartridge bearing, 20mm thru-axle, 32h

REAR HUB

Specialized Hi Lo disc, laser-etched logo, sealed cartridge bearing, bolt-on, 32h

SPOKES

2.0mm (14g) stainless

FRONT TIRE

Specialized Butcher SX, 60 TPI, aramid bead, soft dual compound, 26x2.3""

REAR TIRE

Specialized Butcher SX, 60 TPI, aramid bead, soft dual compound, 26x2.3""

INNER TUBES

Schraeder valve 26x2.4/2.75, 1.2mm thick

SUSPENSION

REAR SHOCK

Fox Van RC, coil w/piggy back, compression and rebound adj., 8.5x2.5"", S:400, M:450, L:500

FORK

RockShox Domain Dual Crown RC, coil spring, alloy steerer, external rebound and compression adj., 20mm Maxle DH thru-axle, 200mm travel

DRIVETRAIN

REAR DERAILLEUR

SRAM X.9, 9-speed, short cage

SHIFT LEVERS

SRAM X.7, 9-speed, aluminum trigger

CASSETTE

Shimano HG50, 9-speed, 11-34t

CHAIN

SRAM PC-971, 9-speed w/Power Link

CRANKSET

Gravity Moto-X MegaExo, forged solid arms, 170mm

CHAINRINGS

36t steel, 4-bolt, compact 104mm pattern

BOTTOM BRACKET

FSA MegaExo sealed outboard cartridge bearing for Moto-X crank, 73mm shell

COCKPIT

SEATPOST

6061 alloy, two bolt micro adjust, no offset, 30.9mm, 300mm

STEM

Specialized Direct-Mount stem, 40mm length, 31.8mm, 4-bolt, forged

HANDLEBARS

DH low-rise bar, 6061 alloy, 750mm wide, 8 degree backsweep, 6 degree up, 31.8mm

GRIPS

Specialized lock-on, S/M: Grappler, Other: Rocca

SADDLE

Specialized Demo, 7mm hollow Cr-Mo rails

ACCESSORIES

PEDALS

Alloy platform, removeable pins, 9/16""

BRAKES

FRONT BRAKE

Custom Avid Elixir R, hydraulic disc, reach adjust, metallic pads, stainless hardware, 203mm rotor

REAR BRAKE

Custom Avid Elixir R, hydraulic disc, reach adjust, metallic pads, stainless hardware, 185mm rotor

BRAKE LEVERS

Custom Avid Elixir R hydraulic, tool-less reach adj.

* Weights based on production painted frames as pictured. Actual weights will vary based on colourway, frame size, and component variation. Specifications are subject to change without notice.

Geometry

	S	M	L
Ground-Top	960mm	960mm	960mm
Bottom Bracket Height - Low Setting	365mm	365mm	365mm
Top Tube Length (Horizontal)	563mm	586mm	608mm
Head Tube Height	120mm	120mm	120mm
Head Tube Angle - Low Setting	65.5°	65.5°	65.5°
Seat Tube Angle (Actual) - Low Setting	71°	71°	71°
Seat Tube Angle (Effective) - Low Setting	75°	75°	75°
Top Tube Length (Actual)	537mm	554mm	576mm
Seat Tube Length - Center to Top	394mm	419mm	458mm
Wheel Base	1162mm	1185mm	1207mm
Standover Height	758mm	769mm	770mm
Stack	595mm	595mm	595mm
Reach	404mm	427mm	449mm
Chainstay Length	426mm	426mm	426mm
Crank Length	170mm	170mm	170mm
Handlebar Width	750mm	750mm	750mm
Stem Length	40mm	40mm	40mm
Seatpost Length	300mm	300mm	300mm