Specialized.com

Setting up your bike

To set up your bike, use the following tools:

1

4mm Hex tool

2

5mm Hex tool

3

13mm Wrench

4

15mm Wrench

Adjust your saddle

Set your saddle height to this mark:

0

Loosen the seat collar and adjust the seat post to the recommended numbered position. Tighten the seat collar. With the provided torque wrench, tighten the bolt to 6-7 Nm.

Adjust your handlebars

Set your handlebars to position:

0

Loosen the faceplate bolts from the stem. Adjust the bar to the recommended numbered position. Tighten the faceplate and make sure the S logo is centered.

Safety Check

Before your rider gets going, make sure the bike is in ship shape!

Check all nuts, bolts, and screws to make sure they’ve been tightened. Especially the seatpost and faceplate bolts. Also, make sure that the saddle is in alignment with the centerline of the bike.

Test Ride

Let the rider pedal around outside for a couple minutes.

Watch them ride and make sure they seem stable. They should be able to pedal comfortably as well as start and stop easily.

Want to take it to the next level?

Set your saddle height to this mark:

0

If the rider feels comfortable riding around, you can try raising the saddle height for a more advanced fit. This will help the rider pedal harder with less effort, going further, faster.\nIf the rider prefers to have their feet flat on the ground, that’s ok too.

Summary

Every bike fit is so unique, and we’re glad you’ve found yours. We know kids grow fast, so make sure to revisit this tool every six months. Adjust as your child grows to ensure the Jett fits better for longer.

Your Measurements

Height:

0

cm

Shin length:

0

cm

Arm length:

0

cm

Your results:

Saddle:

0

Handlebar:

0

Advanced Fit:

Saddle:

0

Handlebar:

0

Specialized will use your information in accordance with its Terms of Use and Privacy Policy.

My Location

Use My Location

Set Your Preferred Retailer

Use My Location

My Retailer

None saved

Other Stores Near You