My Location

Enter your ZIP code so we can provide the most accurate inventory and delivery information.

Use My Location

See Full Map
Set Your Preferred Retailer

Use My Location

See Full Map
My Retailer

None saved

Other Stores Near You

Stumpjumper FSR Pro Carbon 29

2017 Stumpjumper FSR Pro Carbon 29

Why should S-Works have all the fun? With our Stumpjumper FSR Pro Carbon 29, you get most of the same performance features, like a custom Öhlins rear shock, so you can climb and descend with the best of them at break-neck speed. Starting at the carbon layup, it features our highest-end FACT 11m for an ultra-lightweight, strong, and stiff construction. The carbon molding process also allowed us to revolutionize how you carry your trail essentials with the all-new SWAT™ Door found at the down tube. This compartment will fit a tube, a tool, and pump without rattling or compromising the structural integrity of the frame. And when you add-in an aggressive, trail-eating geometry that features ridiculously short chainstays, a roomy top tube, a low bottom bracket, and a slacked out front end, our proprietary Rx Trail Tune at the shock, and a build spec that spares no expense, you have a bike that, without a doubt, is ready for anything on the trail.

Technical Specifications

FRAMESET

FRAME

FACT 11m, full carbon chassis and rear end, Trail Geometry, SWAT™ Door integration, PF30 BB, fully enclosed internal cable routing, ManFu link, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 135mm of travel

SEAT BINDER

Alloy, 34.9mm

SUSPENSION

REAR SHOCK

Custom Öhlins STX, Single Tube design, Rx Trail Tune, 3rd Chamber air spring technology, AUTOSAG, adjustable compression & rebound damping, 197x48mm

FORK

RockShox Pike RC 29/27.5+, Solo Air, compression and rebound adjust, tapered steerer, 15x110mm Maxle Stealth thru-axle, 51mm offset, 150mm travel

WHEELS

RIMS

Roval Traverse 29, hookless alloy, 29mm inner width, 24/28h, tubeless ready

FRONT HUB

Roval Traverse, sealed cartridge bearings, 15mm thru-axle, 110mm spacing, 24h

REAR HUB

Roval Traverse, DT Swiss internals, sealed cartridge bearings, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h

SPOKES

DT Swiss Revolution

REAR TIRE

Slaughter, GRID casing, 29x2.3"", 60TPI, Aramid folding bead, 2Bliss Ready

FRONT TIRE

Butcher, GRID casing, 29x2.3"", 60TPI, Aramid folding bead, 2Bliss Ready

INNER TUBES

29x1.75/2.4"", 60mm Presta valve

DRIVETRAIN

REAR DERAILLEUR

SRAM X01 Eagle, 12-speed

SHIFT LEVERS

SRAM X01 Eagle, 12-speed, trigger

CASSETTE

SRAM XG-1295, 12-speed, 10-50t

CHAIN

SRAM X01 Eagle, silver, 12-speed w/PowerLink

CRANKSET

Custom SRAM X1, alloy, 30mm spindle, 52mm chainline, 30T

BOTTOM BRACKET

SRAM PF30, OS press-in bearings

COCKPIT

STEM

Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise

HANDLEBARS

Specialized Trail, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 25mm rise, 750mm width, 31.8mm

SADDLE

Body Geometry Henge Expert, hollow titanium rails, 143mm

GRIPS

Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness

SEATPOST

Command Post IRcc, 12 position micro-height adjustable, alien head design, bottom mount cable routing, remote SRL lever, 30.9mm, S: 100mm, M/L/XL: 125mm travel

BRAKES

FRONT BRAKE

SRAM Guide RS, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200mm rotor

REAR BRAKE

SRAM Guide RS, hydraulic disc, organic pads, Guide S4 4-piston caliper, 180/160mm rotor

ACCESSORIES

PEDALS

Resin Test Ride w/toe clips

* Weights based on production painted frames as pictured. Actual weights will vary based on colourway, frame size, and component variation. Specifications are subject to change without notice.

Geometry

SMLXL
Crank Length170mm175mm175mm175mm
Handlebar Width750mm750mm750mm750mm
Stem Length45mm60mm60mm60mm
Saddle Width143mm143mm143mm143mm
Seatpost Length390mm430mm430mm430mm
Seat-Tube Angle74°74°74°74°
Head-Tube Length95mm95mm125mm145mm
Head-Tube Angle67°67°67°67°
Chain-Stay Length437mm437mm437mm437mm
Front-Center687mm714mm744mm777mm
B-B Drop33mm33mm33mm33mm
Bike Stand-Over Height754mm761mm770mm777mm
Fork Length (full)560mm560mm560mm560mm
Top-Tube Length (horizontal)563mm590mm616mm648mm
Seat-Tube Length396mm430mm468mm523mm
B-B Height (29x2.3")338mm338mm338mm338mm
B-B Height (650x3.0")331mm331mm331mm331mm
B-B Height (650x2.8")325mm325mm325mm325mm
Stack618mm618mm646mm664mm
Reach386mm413mm431mm457mm
Trail96.5mm96.5mm96.5mm96.5mm
Fork Rake/Offset51mm51mm51mm51mm
Wheelbase1122mm1149mm1179mm1212mm
Geometry

Rider Reviews

  • 0
  • 0 Reviews