2018 Stumpjumper Comp Alloy 29/6Fattie

0 Anmeldelser

Farve:

Gloss Hyper/Mint Clean

Hvilken er min størrelse?

Imperial

Metrisk

Indtast din højde, så beregner vi din størrelse

Højde:

For et mere præcist resultat, så inkluder din skinnebenslængde

Vælg en Størrelse

Vælge farve og størrelse for at se lagerstatus hos forhandler

Ikke tilgængelig

Artiklen er ikke tilgængelig for “Find i nærheden”

Levering til -----

Produktinformation

Don't get us wrong—carbon is awesome. But when it comes to maintaining peace of mind while you're getting rowdy, nothing compares to the confidence of our alloy Stumpjumper Comp 29/6Fattie. It's light, rugged, and packed with all the spec and travel you need to run it wide open out on the trail.

It features an M5 alloy construction that's lightweight, durable, and plenty stiff and compliant, while SRAM's most durable one-by components have been hand-selected to ensure that you get the most performance over rugged terrain possible. To make things even better, the Stumpy's design also allows you the opportunity to toggle between 29-inch wheels and 6Fattie wheels (not included), allowing the ultimate in configuration options for the trail at hand.

And when you factor in our proprietary Rx Trail Tune at the shock, plus an aggressive, trail-eating geometry that features absurdly short chainstays, a roomy top tube, a low bottom bracket, and a slacked out front end, you get a trail bike that you can be confident in, season after season.

M5 alloy Trail Chassis with Stumpjumper FSR rear end blends durability, stiffness, and light weight, while 135mm of travel Trail Geometry provide more than capable handling.
A RockShox Reba RL fork handles suspension up front with ease, soaking up bumpy terrain with 150mm of plush travel.
SRAM's 11-speed GX groupset features a wide gear range that delivers climbing and descending efficiency in spades. On top of this, the one-by setup is notorious for being next to impossible to drop a chain with, plus it provides a significant weight savings in comparison to a standard two-by setup.

Tekniske specifikationer

FRAMESET

FRAME

Specialized M5 Aluminum, 29/6Fattie Trail Geometry, PF30 BB, internal cable routing, ManFu link, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 135mm of travel

SEAT BINDER

Alloy, 34.9mm

SUSPENSION

REAR SHOCK

RockShox Monarch RT, Rx Trail Tune, AUTOSAG, rebound and 2-position compression adjust, 197x48mm

FORK

RockShox Reba RL, tapered alloy steerer, 51mm offset, external rebound adjust, low speed comp to lockout, 15mm Maxle® Lite thru-axle, custom 15x110 Boost™, 150mm of travel

WHEELS

RIMS

Roval Traverse 29, hookless alloy, 29mm internal width, tubeless-ready, 24/28h

FRONT HUB

Specialized, sealed cartridge bearings, 15x110mm spacing, 24h

REAR HUB

Specialized, sealed cartridge bearings, 12x148mm thru-axle, 28h

SPOKES

DT Swiss Industry, stainless, 3-cross, 2.0"

FRONT TIRE

Butcher, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"

REAR TIRE

Purgatory, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"

INNER TUBES

Standard, Presta valve

DRIVETRAIN

REAR DERAILLEUR

SRAM GX, long cage, 11-speed

SHIFT LEVERS

SRAM GX, trigger, 11-speed

CASSETTE

SRAM XG 1150, 11-speed, 10-42t

CHAIN

KMC X11, 11-speed w/ Missing Link™

CRANKSET

Race Face Aeffect, PF30

CHAINRINGS

Steel, 28T

BOTTOM BRACKET

Race Face PF30

COCKPIT

STEM

Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise

HANDLEBARS

Specialized, 6061 alloy, 6-degree upsweep, 8-degree backsweep, 27mm rise, 780mm width

GRIPS

Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness

SADDLE

Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm

SEATPOST

Command Post IRcc, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote SRL lever, 30.9mm, S: 100mm, M/L/XL: 125mm of travel

BRAKES

FRONT BRAKE

SRAM Guide R, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200/180mm rotor

REAR BRAKE

SRAM Guide R, hydraulic disc, organic pads, Guide S4 4-piston caliper, 180/160mm rotor

ACCESSORIES

PEDALS

Specialized Platform, Cr-Mo, 9/16" spindle

*Vægte baseret på produktion af malede rammer som afbildet. Faktiske vægte vil variere baseret på farveskema, ramme størrelse og komponent variation. Specifikationer kan ændres uden varsel.

Geometri

	S	M	L	XL	XXL
Pedalarmslængde	170MM	170MM	170MM	170MM	170MM
Styrbredde	780mm	780mm	780mm	780mm	780mm
Frempindslængde	45MM	60MM	60MM	60MM	60MM
Sadelbredde	143mm	143mm	143mm	143mm	143mm
Sadelpinds længde	390mm	430mm	430mm	430mm	430mm
BB Height, 29x2.3"	338mm	338mm	338mm	338mm	338mm
Stellets stakhøjde	617mm	617mm	645mm	663mm	686mm
Stellængde (reach)	389mm	417mm	435mm	461mm	477mm
Kronrørslængde	125mm	145mm	170mm	95mm	95mm
Kronrørsvinkel	67.5°	67.5°	67.5°	67.5°	67.5°
Krankboksens drop	36mm	36mm	36mm	36mm	36mm
Efterløb	104mm	104mm	104mm	104mm	104mm
Forgaffel Længde	551mm	551mm	551mm	551mm	551mm
Forgaflens fremløb	46mm	46mm	46mm	46mm	46mm
Krankboks – Fornavs afstand	680mm	708mm	738mm	771mm	797mm
Kædestagslængde	437mm	437mm	437mm	437mm	437mm
Akselafstand	1115mm	1143mm	1172mm	1206mm	1232mm
Faktisk overrørslængde, horisontal	551mm	582mm	611mm	647mm	674mm
Skridthøjde	750mm	757mm	766mm	776mm	778mm
Sadelrørslængde	396mm	430mm	468mm	523mm	564mm
Sadelrørsvinkel	74°	74°	75°	75°	75°