Men's Camber Expert 27.5

2018 Men's Camber Expert 27.5

It's not often that climbing prowess and playful handling are in the same sentence, but with the Camber Expert 27.5, you get the best of both worlds—blending all of the trail bike characteristics that you want with the XC climbing ability that you need.

This is achieved by thoughtfully combining our full FACT 9m carbon fiber Trail Chassis with our M5 alloy Camber FSR rear end. At both ends of the bike, you'll find that its nimble wheel size gives a little extra travel length to deliver plenty of plush suspension—all without going overboard on big hit capability. This means that you don't have to sacrifice efficiency, weight, or sheer speed to ride how you want. And with our Trail 27.5 Geometry and lightweight, stiff, and smooth Concentric Pivot at the rear, we can guarantee it.

The other trail component of the Camber is utility, and along these lines, it features our fully integrated SWAT™ Door at the down tube of the frame. Open it up, and you're able to safely and securely house your ride essentials right where you want them—on the bike.

For the build, we selected an excellent spec with components like 12-speed SRAM GX Eagle, SRAM Level TL brakes, a FOX 34 fork with a ultra-stiff stanchions, a custom-tuned FOX FLOAT rear shock, and Roval Traverse Carbon rims laced to our own hubs.

Technical Specifications

FRAMESET

FRAME

FACT 9m carbon front chassis w/ Specialized M5 Aluminum rear end, 27.5 Trail Geometry, SWAT™ Door integration, PF30 BB, fully enclosed internal cable routing, Concentric Pivot link, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 130mm of travel

SEAT BINDER

Alloy, 34.9mm

WHEELS

FRONT HUB

Specialized, sealed cartridge bearings, 15x110mm spacing, 24h

REAR HUB

Specialized, sealed cartridge bearings, 12x148mm thru-axle, 28h

RIMS

Roval Traverse Carbon 27.5, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built

INNER TUBES

27.5 x 1.75/2.4mm, 40mm Presta valve

REAR TIRE

Ground Control, Gripton compound, 2Bliss Ready, 27.5 x 2.3"

FRONT TIRE

Purgatory, Gripton compound, 2Bliss Ready, 27.5 x 2.3"

SPOKES

DT Swiss Industry, stainless, 3-cross, 2.0"

SUSPENSION

FORK

FOX 34 Performance 27.5, air spring, 3-position lever adjust, tapered steerer, 15x110mm thru-axle, 44mm offset, 130mm travel

REAR SHOCK

FOX FLOAT Performance, Rx Trail Tune, AUTOSAG, DPS damper, rebound and 3-position compression adjust, 205x53mm

DRIVETRAIN

REAR DERAILLEUR

SRAM GX Eagle, 12-speed

CHAINRINGS

Steel, 32T

CHAIN

SRAM GX Eagle, 12-speed w/ PowerLock®

CRANKSET

Truvativ Descendant, alloy, 175/170mm crankarm, 30mm spindle

CASSETTE

SRAM GX Eagle, 12-speed, 10-50t

SHIFT LEVERS

SRAM GX Eagle, trigger, 12-speed

BOTTOM BRACKET

SRAM PF30

COCKPIT

SADDLE

Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm

GRIPS

Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness

HANDLEBARS

Specialized Trail, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 25mm rise, 750mm width, 31.8mm clamp

STEM

Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise

SEATPOST

Command Post IRcc, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote SRL lever, 30.9mm, S: 100mm, M/L/XL: 125mm of travel

ACCESSORIES

PEDALS

Specialized Platform, Cr-Mo, 9/16" spindle

BRAKES

REAR BRAKE

SRAM Level TL disc lever/caliper, organic pads, 180/160mm rotors

FRONT BRAKE

SRAM Level TL disc lever/caliper, organic pads, 200/180mm rotors

* Weights based on production painted frames as pictured. Actual weights will vary based on colorway, frame size, and component variation. Specifications are subject to change without notice.

Geometry

	S	M	L	XL
Crank Length	170mm	175mm	175mm	175mm
Handlebar Width	750mm	750mm	750mm	750mm
Stem Length	60mm	60mm	75mm	90mm
Saddle Width	143mm	143mm	143mm	143mm
Seatpost Length	390mm	430mm	430mm	430mm
Stack	580mm	590mm	599mm	608mm
Reach	399mm	425mm	454mm	475mm
Head Tube Length	105mm	115mm	125mm	95mm
Head Tube Angle	68°	68°	68°	68°
BB Drop	23mm	23mm	23mm	23mm
Trail	97mm	97mm	97mm	97mm
Fork Length, Full	522mm	522mm	522mm	522mm
Fork Rake/Offset	42mm	42mm	42mm	42mm
Front Center	670mm	700mm	732mm	757mm
Chainstay Length	420mm	420mm	420mm	420mm
Wheelbase	1089mm	1119mm	1151mm	1176mm
Top Tube Length, Horizontal	554mm	583mm	614mm	638mm
Bike Standover Height	725mm	730mm	743mm	752mm
Seat Tube Length	396mm	430mm	468mm	523mm
Seat Tube Angle	75°	75°	75°	75°

Manual Downloads

Specialized Mission Control App (Android)

Camber Alloy Schematic

Specialized Bicycle Owner's Manual Addendum: Riding With Kids

Specialized Bicycle Owner's Manual (All Languages)

2018 Rider/Bike Weight Limits and Terrain Conditions

Command Post IRcc Instruction Guide

Trainer Usage Addendum to the Bicycle Owner's Manual

Specialized Bicycle Owner's Manual (English)

Specialized Mission Control App (iOS)

Specialized Ride App (Android)

Specialized Ride App (iOS)

Rider Reviews

5
3 Reviews

06/22/2020

I love this bike

I bought this at the end of 2018 and have put it through its paces. Uphill, downhill, XC and everything in between. The first year I had it put almost 900 miles on the bike without a single mechanical failure. That included the Vermont 50 MTB race. This was my first excursion into a full suspension bike and I love it.

Name:: Mtb K.

Helpful?

07/02/2018

Love my Camber

I had to have a women's expert Camber be custom built because Specialized doesn't get what women want. That said, I love my Camber. Love the SWAT, the way it rolls over rocks, and thought it's a tad slower on the climbs, the 650 wheels with the wider rims are perfect for the New Mexico gnar.

Name:: Jackie

Helpful?

My Location

Use My Location

Set Your Preferred Retailer