My Location

Enter your ZIP code so we can provide the most accurate inventory and delivery information.

Use My Location

See Full Map
Set Your Preferred Retailer

Use My Location

See Full Map
My Retailer

None saved

Other Stores Near You

S-Works Stumpjumper Carbon 29/6Fattie Frame

2018 S-Works Stumpjumper Carbon 29/6Fattie Frame

When only the best will do, you need the ultimate trail bike. In other words, you need the S-Works Stumpjumper 29/6Fattie. It reflects everything that we've learned over the years, and in our eyes, represents the pinnacle of trail performance.

Starting at the carbon layup, it features our highest-end FACT 11m for an ultra-lightweight, strong, and stiff construction. The carbon molding process also allowed us to revolutionize how you carry your trail essentials with the SWAT™ Door found at the down tube. This compartment will fit a tube, a tool, and pump without rattling or compromising the structural integrity of the frame.

You'll also find an aggressive, trail-eating geometry that features ridiculously short chainstays, a roomy top tube, a low bottom bracket, a slacked out front end, and our proprietary Rx Trail Tune at the rear shock. This frame also includes a custom Öhlins STX rear shock with our venerable, easy-to-set-up AUTOSAG system. This Stumpy's design also allows you the opportunity to toggle between 29-inch wheels and 6Fattie wheels (not included), allowing for the ultimate in configuration options for the trail at hand.

Technical Specifications

FRAMESET

FRAME

S-Works FACT 11m, full carbon chassis and rear end, 29/6Fattie Trail Geometry, SWAT™ Door integration, PF30 BB, fully enclosed internal cable routing, ManFu link, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 135mm of travel

SEAT BINDER

Alloy, 34.9mm

SUSPENSION

REAR SHOCK

Custom Öhlins STX, Single-Tube design, Rx Trail Tune, 3rd Chamber air spring technology, AUTOSAG, adjustable compression & rebound damping, 197x48mm

* Weights based on production painted frames as pictured. Actual weights will vary based on colourway, frame size, and component variation. Specifications are subject to change without notice.

Geometry

SMLXL
BB Height, 29x2.3"338mm338mm338mm338mm
Stack618mm618mm646mm664mm
Reach386mm413mm431mm457mm
Head Tube Length125mm145mm95mm95mm
Head Tube Angle67°67°67°67°
BB Drop33mm33mm33mm33mm
Trail96.5mm96.5mm96.5mm96.5mm
Fork Length, Full560mm560mm560mm560mm
Fork Rake/Offset51mm51mm51mm51mm
Front Center687mm714mm744mm777mm
Chainstay Length437mm437mm437mm437mm
Wheelbase1122mm1149mm1179mm1212mm
Top Tube Length, Horizontal563mm590mm616mm648mm
Bike Standover Height754mm761mm770mm777mm
Seat Tube Length396mm430mm468mm523mm
Seat Tube Angle74°74°74°74°
Geometry

Rider Reviews

  • 0
  • 0 Reviews